
Stackable Mixer
roryjamesallen/stackable-mixer
A stackable mixer project for Eurorack

A stackable mixer project for Eurorack
Summing Stage is an open-source printed circuit board by roryjamesallen, from the roryjamesallen/stackable-mixer repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 20 × 110 mm with 21 parts on 31 nets, routed with 252 tracks and 37 vias.
Its parts include 6 capacitors, 6 resistors, 2 diodes, 2 connectors and 1 IC. It belongs with the audio and music boards of this library.
A versatile, affordable, free hardware, stereo mixer for Eurorack

Each input channel has either mono or stereo inputs, a balance control, a mute switch, and a volume control. The output stage has a stereo TRS (headphone) output, but patching into the right input will break the normalling, allowing you to output stereo over two mono cables. The output also has a mute switch and volume control, so you can easily mute your system or adjust the master volume depending on where your output is going.
Each input channel is passive, so can be made very affordably, although ±12V and Earth are available from the bus which carries the stereo signals, so future/user-developed input stages could be active, for example an input stage with an active EQ.
There is also of course the potential for alternative output stages, such as balanced 6.35mm or separate output and monitor outputs for headphone monitoring during a live set.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C5, C6 |
| 4 | 4.7k | Eurorack:Resistor 0.25W Through-Hole | R3, R4, R5, R6 |
| 2 | 10u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C3, C4 |
| 2 | 1k | Eurorack:Resistor 0.25W Through-Hole | R1, R2 |
| 2 | DIODE | Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_AnodeUp | D1, D2 |
| 1 | AudioJack3 | Eurorack:Thonkiconn Stereo Jack | J2 |
| 1 | Conn_02x05_Counter_Clockwise | Eurorack:Eurorack Power Header | PowerHeader1 |
| 1 | Header_2.0mm_Right_Angle_Female | Eurorack:Header 01x12 2.0mm Right Angle Female | CONN1 |
| 1 | Potentiometer_45mm_Slide_Audio_Dual | Eurorack:Potentiometer 45mm Slide Audio | VR1 |
| 1 | SW_DPDT_x2 | Eurorack:Sub-Miniature Toggle Switch DPDT | SW1 |
| 1 | TL074 | Eurorack:DIP-14 IC Socket | IC1 |
| 1 | Thonkiconn_Mono_Jack | Eurorack:Thonkiconn Mono Jack | J1 |

roryjamesallen/stackable-mixer
A stackable mixer project for Eurorack

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 20 × 110 mm and has 2 copper layers, 1.6 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the roryjamesallen/stackable-mixer repository on GitHub, at the commit this page was made from: the board is hardware/kicad-output-stage/Summing Stage.kicad_pcb and its schematic hardware/kicad-individual-channel/Stackable Mixer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).