2 layers100 × 100 mm
2 layers71 × 71 mm
Iqrf led controller
Roman3349/led-controller-v2Second version of my IQRF RGB LED Controller
- Size
- 71 × 71 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 54
- Pads
- 188
- Tracks, vias
- 309, 23
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Dec 2020
- Updated
- 11 Jan 2021
Overview
Iqrf led controller is an open-source printed circuit board by Roman3349, from the Roman3349/led-controller-v2 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 71 × 71 mm with 53 parts on 54 nets, routed with 309 tracks and 23 vias.
It is built around the ESP32-WROOM-32D, BUK98150-55A-VB and FDD4243. Its parts include 16 resistors, 12 capacitors, 7 transistors, 4 ICs and 4 connectors. It belongs with the ESP32 boards of this library.
Main components
3Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4, R5, R6, R8, R9, R11, R12, R14 |
| 8 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C8, C10, C11, C12 |
| 6 | BUK98150-55A | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q1, Q2, Q4, Q5, Q6, Q7 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 3 | SW_Push_Dual | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW1, SW2, SW3 |
| 2 | 10R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3 |
| 2 | 3.3k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15, R16 |
| 2 | DG300-5.0 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J2, J3 |
| 2 | Jumper_2_Bridged | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | JP1, JP2 |
| 1 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6 |
| 1 | 2.7k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13 |
| 1 | 22u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9 |
| 1 | 2A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 4.7k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 4.7u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
| 1 | 470u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C5 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U4 |
| 1 | FDD4243 | Package_TO_SOT_SMD:TO-252-2 | Q3 |
| 1 | INA219AxD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | LDL1117S33R_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | R100 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R7 |
| 1 | SMAJ12CA-E3/61 | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | TR-72DAT | RF_Module:IQRF_TRx2DA_KON-SIM-01 | U2 |
Questions
How big is the Iqrf led controller PCB?
It measures 71 × 71 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Iqrf led controller use?
53 parts, built around the ESP32-WROOM-32D, BUK98150-55A-VB and FDD4243. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Iqrf led controller KiCad files?
From the Roman3349/led-controller-v2 repository on GitHub, at the commit this page was made from: the board is hw/iqrf-led-controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Iqrf led controller design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers72.8 × 38 mm
- 2 layers99.9 × 99.9 mm
GR Low Side Switch
GadgetReboot/Low_Side_Switch
16 channel low-side switch for driving resistive/inductive loads
202 parts2CC-BY-SA-4.0 - 2 layers34.7 × 1 mm
- 2 layers55.9 × 44.5 mm
Esp humidity
mattvenn/kicad
The documentation for this workshop mostly consists of youtube screencasts. The screencasts are deliberately fast, if you need them slower then click the video's settings button and choose a slower speed.
16 parts14 - 2 layers72 × 42 mm
NRF24 jammer
W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.
51 parts1kMIT - 2 layers100 × 57 mm
- 2 layers189.5 × 204.9 mm
SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!
749 parts292GPL-2.0