

DA15toUSBC
A custom PCB with an STM32F042F6Px to translate the outputs from my Rockfire QF-8I joystick to a USB-C HiD-class connector.
- Size
- 50 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 29
- Pads
- 113
- Tracks, vias
- 262, 61
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 18 Sep 2026
- Updated
- 19 Sep 2026
Overview
DA15toUSBC is an open-source printed circuit board by rollonit, from the rollonit/DA15-USBC-Translator repository on GitHub. It is a 2-layer board of 50 × 25 mm with 36 parts on 29 nets, routed with 262 tracks and 61 vias.
It is built around the LP5907MFX-3.3, USBLC6-2SC6 and 0805L035/6XR. Its parts include 12 capacitors, 9 resistors, 4 connectors, 3 ICs and 2 diodes. It belongs with the STM32 boards of this library.
Main components
3LP5907MFX-3.3
SOT-23-5-40℃~+125℃@(Tj) 1 10uVrms 12uA 250mA 250mV@(250mA) 3.3V 5.5V 82dB@(1kHz) Fixed Positive Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)0805L035/6XR
0805-40℃~+85℃ 1.1mm 1.2Ω 1.5mm 100ms 2.2mm 200mΩ 350mA 40A 500mW 6V 750mA 0805 Resettable Fuses ROHSLUTEResettable Fuses
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C8, C9, C10, C11, C12 |
| 4 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9, R10 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C6, C7 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4 |
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1, J5 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 2 | M4.5 | MountingHole:MountingHole_4.5mm_Pad | H1, H3 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 220R@100MHz | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1 |
| 1 | 350/750 mA | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | LP5907MFX-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad | H2 |
| 1 | STM32F042F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | SW_SPDT | DA15toUSBC:SW-TH_SS-12F44-G5 | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
Similar boards
- 4 layers299 × 127 mm

- 4 layers231 × 67 mm

- 4 layers130 × 90 mm

- 4 layers85.5 × 56 mm

- 4 layers50 × 50 mm

FlightController Drone
damnitzhemanth-oss/Flight_Controller
Custom STM based flightcontroller designed from scratch.
157 parts - 4 layers125 × 92 mm

Carradio peripheral rev03
gschuurman/android_vendor_gschuurman_vehicle_interfaces
vehicle interfaces for android automotive for a custom headunit
269 parts - 4 layers42 × 42 mm

VayuF7
ishantmahatopro/Vayu-F722
Custom 42x42mm 4-layer STM32F722 FPV flight controller for 5in and 7in cinematic and telemetry quads.
146 partsMIT - 6 layers42.5 × 54.5 mm

AudioBridge-411
Laudatur/Projekty
Układ łączy cyfrową transmisję pakietową po magistrali USB z bezstratną konwersją cyfrowo-analogową I2S, wykorzystując wbudowaną pompę ładunku przetwornika do bezpośredniego sprzężenia wyjścia audio z potencjałem masy…
60 parts
Questions
How big is the DA15toUSBC PCB?
It measures 50 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DA15toUSBC use?
36 parts, built around the LP5907MFX-3.3, USBLC6-2SC6 and 0805L035/6XR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DA15toUSBC KiCad files?
From the rollonit/DA15-USBC-Translator repository on GitHub, at the commit this page was made from: the board is pcb/DA15toUSBC.kicad_pcb and its schematic pcb/DA15toUSBC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DA15toUSBC design in my own project?
Its repository states no licence, so its author keeps all rights: ask rollonit before reusing the design.