2 layers52 × 25.4 mm
UINIO Logic-24MHz
uinika/UINIO-Logic-24MHz
the 24MHz sampling rate Logic Analyzer base on CY7C68013A.
55 parts10
4 layers48.5 × 69.9 mm
EZ USB FX2LP dev board
rohamid/EZ-USB-FX2LP-dev-board-masterCY7C68013A development board
- Size
- 48.5 × 69.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 50
- Pads
- 264
- Tracks, vias
- 316, 119
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Feb 2024
- Updated
- 18 Feb 2024
Overview
EZ USB FX2LP dev board is an open-source printed circuit board by rohamid, from the rohamid/EZ-USB-FX2LP-dev-board-master repository on GitHub. It is a 4-layer board of 48.5 × 69.9 mm with 51 parts on 50 nets, routed with 316 tracks and 119 vias.
It is built around the CY7C68013A-56LTXC, 24LC64(LX) and AMS1117-3.3. Its parts include 16 capacitors, 9 resistors, 5 diodes, 5 connectors and 3 ICs. It belongs with the microcontroller boards boards of this library.
Main components
3
CY7C68013A-56LTXC
QFN-56-EP(8x8)0℃~+70℃ 16KB 16KB 24 3V~3.6V 48MHz 51 Series 8 Bit External ROMless QFN-56-EP(8x8) Microcontrollers (MCU/MPU/SOC)Infineon TechnologiesMicrocontrollers (MCU/MPU/SOC)
24LC64(LX)
SOP-8-40℃~+85℃ 1,000,000 cycles 1.8V~5.5V 100 Years 1MHz 5ms 64Kbit Hardware write protection function、Noise suppression function I2C SOP-8 EEPROM ROHSlingxingicEEPROM
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdEZ USB FX2LP Development board
EZ USB FX2LP CY7C68013A Development board
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7, C8, C9, C11, C13 |
| 4 | 1K | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R8, R10 |
| 3 | 5017 | Keystone_5017_testring:Keystone_5017_testring | TP1, TP2, TP3 |
| 3 | RED | LED_SMD:LED_0805_2012Metric | D2, D3, D4 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 2K2 | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 2 | Conn_01x22 | Connector_PinHeader_2.54mm:PinHeader_1x22_P2.54mm_Vertical | J4, J6 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1, SW2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP4, TP5 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 1N4148 | Diode_SMD:D_SOD-123 | D5 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 24LC64 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | 24MHz' | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 2u2 | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C12 |
| 1 | 500mA | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | CY7C68013A-56LTX | Package_DFN_QFN:QFN-56-1EP_8x8mm_P0.5mm_EP4.5x5.2mm_ThermalVias_TopTented | U1 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J1 |
Similar boards
- 4 layers90.9 × 100 mm
- 4 layers21.5 × 28 mm
- 4 layers81 × 49 mm
- 4 layers80 × 49 mm
- 4 layers47.5 × 47.5 mm
Usb sniffer h7p20
vllogic/dalishen_pi_h7p20
# English # I. Introduction Hardware design format: KiCad 9.0.6 The CH32H417 serves as a USB 3.0 forwarder, with a unidirectional communication speed of up to 400MB/s, breaking the speed bottleneck of the 68013.
140 parts3GPL-3.0 - 2 layers52 × 27.9 mm
- 2 layers69.6 × 37.3 mm
Controller
purdeaandrei/overnumpad_controller_1xb
An open source replacement keyboard controller for 4th generation IBM/Lexmark keyboards, and for some Unicomp keyboards
65 parts27
Questions
How big is the EZ USB FX2LP dev board PCB?
It measures 48.5 × 69.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the EZ USB FX2LP dev board use?
51 parts, built around the CY7C68013A-56LTXC, 24LC64(LX) and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EZ USB FX2LP dev board KiCad files?
From the rohamid/EZ-USB-FX2LP-dev-board-master repository on GitHub, at the commit this page was made from: the board is EZ-USB-FX2LP-dev-board.kicad_pcb and its schematic EZ-USB-FX2LP-dev-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EZ USB FX2LP dev board design in my own project?
Its repository states no licence, so its author keeps all rights: ask rohamid before reusing the design.