
E73-2G4M08S1C-52840
Rogger/schneggi-sensor
A low-power ZigBee sensor integrated with HomeAssistant for monitoring temperature, humidity, and CO2.

A low-power ZigBee sensor integrated with HomeAssistant for monitoring temperature, humidity, and CO2.
Flash adapter is an open-source printed circuit board by Rogger, from the Rogger/schneggi-sensor repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 13 × 22 mm with 3 parts on 5 nets, routed with 26 tracks and 8 vias.
It is built around the FTSH-105-01-L-DV-K-TR. It belongs with the sensors and measurement and interfaces and adapters boards of this library.
This KiCad project is intended to be exported for JLCPCB with KiCad 9.
Use KiCad 9 from your PATH:
kicad-cli versionThe expected version for the checked-in production files is KiCad CLI 9.0.9.
These commands follow JLCPCB's KiCad 9 Gerber/drill preparation guidance:
Edge.Cuts.Comment,Designator,Footprint,JLCPCB Part #(optional).Designator,Mid X,Mid Y,Layer,Rotation, with mm coordinate suffixes.Reference: https://jlcpcb.com/help/article/how-to-generate-gerber-and-drill-files-in-kicad-9 BOM sample: https://static.jlcpcb.com//video/Sample-BOM_JLCSMT.xlsx CPL sample: https://static.jlcpcb.com//video/JLCSMT_Sample_CPL1.xlsx
From hardware/flash_adapter:
make jlcpcbThe Makefile stops before export if DRC errors or ERC violations are found.
It runs the sequence below. For an AppImage installation, override the command:
make jlcpcb KICAD_CLI='/path/to/AppRun kicad-cli'kicad-cli pcb drc --severity-error --schematic-parity --exit-code-violations --output flash_adapter-drc.rpt flash_adapter.kicad_pcb
kicad-cli sch erc --severity-all --exit-code-violations --output flash_adapter-erc.rpt flash_adapter.kicad_sch
rm -f jlcpcb/gerber/*
kicad-cli pcb export gerbers --output jlcpcb/gerber --layers F.Cu,B.Cu,F.Paste,B.Paste,F.Silkscreen,B.Silkscreen,F.Mask,B.Mask,Edge.Cuts --use-drill-file-origin flash_adapter.kicad_pcb
kicad-cli pcb export drill --output jlcpcb/gerber --format excellon --drill-origin plot --excellon-units mm --excellon-zeros-format decimal --excellon-oval-format alternate flash_adapter.kicad_pcb
kicad-cli sch export bom --fields Value,Reference,Footprint,'LCSC Part' --labels Comment,Designator,Footprint,'JLCPCB Part #(optional)' --output jlcpcb/production_files/BOM-flash_adapter.csv flash_adapter.kicad_sch
sed -i 's/"//g' jlcpcb/production_files/BOM-flash_adapter.csv
kicad-cli pcb export pos --side front --format csv --units mm --smd-only --use-drill-file-origin --output /tmp/CPL-flash_adapter.raw.csv flash_adapter.kicad_pcb
awk -F, 'BEGIN { print "Designator,Mid X,Mid Y,Layer,Rotation" } NR > 1 { gsub(/"/, ""); layer = ($7 == "top" ? "Top" : ($7 == "bottom" ? "Bottom" : $7)); printf "%s,%.4fmm,%.4fmm,%s,%.0f\n", $1, $4, $5, layer, $6 }' /tmp/CPL-flash_adapter.raw.csv > jlcpcb/production_files/CPL-flash_adapter.csv
rm -f jlcpcb/production_files/GERBER-flash_adapter.zip
zip -j -q jlcpcb/production_files/GERBER-flash_adapter.zip jlcpcb/gerber/*.gtl jlcpcb/gerber/*.gbl jlcpcb/gerber/*.gtp jlcpcb/gerber/*.gbp jlcpcb/gerber/*.gto jlcpcb/gerber/*.gbo jlcpcb/gerber/*.gts jlcpcb/gerber/*.gbs jlcpcb/gerber/*.gm1 jlcpcb/gerber/*.drlThe Gerber package uses JLCPCB-style Protel extensions and a single merged Excellon drill file. The BOM and CPL match the JLCPCB sample column names and column order.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | FTSH-105-01-L-DV-K-TR | schneggi_library:CONN-SMD_FTSH-105-01-L-DV-K-TR | J1 |
| 1 | HX PZ2.54-2x5P WT | easyeda_import:HDR-SMD_10P-P2.54-H-M-R2-C5-W18.0 | J2 |
| 1 | LOGO | schneggi_library:schneggi | G*** |

Rogger/schneggi-sensor
A low-power ZigBee sensor integrated with HomeAssistant for monitoring temperature, humidity, and CO2.

Rogger/schneggi-sensor
A low-power ZigBee sensor integrated with HomeAssistant for monitoring temperature, humidity, and CO2.


MF-Room/mseq_pcb
KiCad 10 hardware design for MSeq embedded, the microcontroller implementation of the MSeq MIDI sequencer.


Toasterfire-come/SafeKeyVault
This project is designed to be a copmplete and total alternative to managed password holders.




It measures 13 × 22 mm and has 2 copper layers, 1.6 mm thick.
3 parts, built around the FTSH-105-01-L-DV-K-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Rogger/schneggi-sensor repository on GitHub, at the commit this page was made from: the board is hardware/flash_adapter/flash_adapter.kicad_pcb and its schematic hardware/base/E73-2G4M08S1C-52840.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).