Skip to the content
4 layersPCIe Slot, the printed circuit board in 3D

This repository is for building blocks, design, ideas and program for building graphics processing engine from scratch.

Copper layers
4
Thickness
1.6 mm
Parts
6
Nets
10
Pads
18
Tracks, vias
4, 0
Pours
1
Routed
Yes
KiCad
KiCad 8 (file 20240108)
Created
20 Jul 2024
Updated
14 Mar 2026

Overview

PCIe Slot is an open-source printed circuit board by rocky115, from the rocky115/ReMDer-GX repository on GitHub. It is a 4-layer board with 6 parts on 10 nets, routed with 4 tracks and 0 vias.

Its parts include 4 capacitors and 2 connectors. It belongs with the computers and single-board computers boards of this library.

README

readme.md

Om Sree Sree Ganeshay Namoh

Om Sree Sree Hanumate Namoh

Om Sree Sree Akhandalamaneih Namoh

This repository is for building blocks, design, ideas and program for building graphics processing engine from scratch.

  1. Folllow the exising benchmarks Nvidia, AMD, Intel

  2. Guide- Render Hell !!

  3. Gurus- QSoc amd Psytech . Go and work there.

  4. Dylan_Berrie_FurryGPU - it seems to be an another Dylan. Nice and neat work. You must try it.

  5. Another resource - "I built my own graphics card" - From JDH It is also a good one. Continue and work hard.

  6. You can refer to this work also - http://ethesis.nitrkl.ac.in/4342/1/u.pdf

1. RMDON-INSIDE_DEEP_BLUE

Let us start on this Teacher's Day 2024

ALU - unit

2. Memory module cache has been added and common module has been assembled

Verify it and assemble it to test it.

  1. Control logic added but not tested so far.

Add control logic after a long time (2026)

See the referred work folder (Comments IITm is doing well and steady work). Refer FurryGPU too and videos inside video folder.

These are hopelessly lazy

We are not getting time.Good luck.

I hope we can start from here. It will be a roller and rocker. Let us see.

Wish you a great day :)

Parts

6
QtyValueFootprintReferences
310uFCapacitor_SMD:C_0805_2012MetricC1, C3, C4
110uFCapac-SharePointitor_SMD:C_0805_2012MetricC2
1Conn_02x02_PinConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalP1
1PCIE_164Connector_PinSocket_2.00mm:PCIE_164J1

Similar boards

  • 4 layers37.1 × 61.5 mmMCLZ8 PCB, the printed circuit board in 3D

    MCLZ8 PCB

    MicroCoreLabs/Projects

    Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.

    6 parts534
  • 4 layers15.6 × 51.4 mmHyperram 3p3v, the printed circuit board in 3D

    Hyperram 3p3v

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    6 parts205
  • 4 layers37 × 27 mmProbecard pinheader, the printed circuit board in 3D

    Probecard pinheader

    azonenberg/starshipraider

    Open hardware test equipment

    6 parts193BSD-3-Clause
  • 4 layers312 × 111.2 mmPCIexpress x1 full, the printed circuit board in 3D

    PCIexpress x1 full

    lucanastasio/PCIexpress-KiCad

    PCI express libraries and templates for KiCad

    6 parts170
  • 4 layersEsp32s3 Wroom 1, the printed circuit board in 3D

    Esp32s3 Wroom 1

    BerkeleyHCI/PolymorphicBlocks

    A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

    6 parts94BSD-3-Clause
  • 4 layers29.4 × 22.1 mmAssembly power, the printed circuit board in 3D

    Assembly power

    buganini/Kikakuka

    Kikakuka — KiCad Workspace, Panelization, Build Variants, Differ & FreeCAD PCB Bending and Assembly

    6 parts81MIT
  • 4 layers30.2 × 40.6 mmMicrostrip width nightly, the printed circuit board in 3D

    Microstrip width nightly

    matthuszagh/fmcw

    6GHz frequency-modulated continuous-wave radar with real-time range detection

    6 parts66Apache-2.0
  • 4 layers149.9 × 99.1 mmArchimedes bus scope, the printed circuit board in 3D

    Archimedes bus scope

    google/myelin-acorn-electron-hardware

    Phillip Pearson's retro hardware projects for the Acorn Electron

    6 parts59Apache-2.0

Questions

What parts does the PCIe Slot use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PCIe Slot KiCad files?

From the rocky115/ReMDer-GX repository on GitHub, at the commit this page was made from: the board is ГоркиBoard/Level-1/GPU_slot/PCIe_Slot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the PCIe Slot design in my own project?

Its repository states no licence, so its author keeps all rights: ask rocky115 before reusing the design.