

DaughterBoard
Make Good Collective Digital White Cane
- Size
- 24 × 36 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 46
- Nets
- 43
- Pads
- 220
- Tracks, vias
- 297, 21
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Mar 2023
- Updated
- 28 Jan 2025
Overview
DaughterBoard is an open-source printed circuit board by rocketperson7, from the rocketperson7/mgc-dwc repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 24 × 36 mm with 46 parts on 43 nets, routed with 297 tracks and 21 vias.
It is built around the IS31FL3193-DLS2-TR. Its parts include 14 resistors, 13 capacitors, 5 ICs, 4 connectors and 1 diode.
Main components
1README
README.mdmgc-dwc
Make Good Collective Digital White Cane
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1k | Resistor_SMD:R_01005_0402Metric_Pad0.57x0.30mm_HandSolder | R5, R6, R7, R8, R9, R10, R11, R12 |
| 7 | 1u | Capacitor_SMD:C_01005_0402Metric_Pad0.57x0.30mm_HandSolder | C2, C3, C5, C6, C7, C10, C13 |
| 6 | 10k | Resistor_SMD:R_01005_0402Metric_Pad0.57x0.30mm_HandSolder | R1, R2, R3, R4, R13, R14 |
| 6 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6 |
| 5 | .1u | Capacitor_SMD:C_01005_0402Metric_Pad0.57x0.30mm_HandSolder | C1, C4, C8, C11, C12 |
| 2 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J2, J3 |
| 2 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J1, J4 |
| 2 | DRV2605LDGSR | MotorDriver:DRV2605LDGSR | U1, U4 |
| 1 | 4.7u | Capacitor_SMD:C_01005_0402Metric_Pad0.57x0.30mm_HandSolder | C9 |
| 1 | IS31FL3193-DLS2-TR | LEDDriver:IS31FL3193-DLS2-TR | U5 |
| 1 | LEDRGB | LED_New:150352M173300 | LED1 |
| 1 | TCA9544APWR | I2CMultiplexor:TCA9544APWR | U2 |
| 1 | VL53L1CXV0FY1 | TOF:VL53L1CXV0FY&slash_1 | U3 |
The 43 most common of 46 parts.
Similar boards
- 4 layers48 × 80 mm

- 4 layers50 × 42 mm

Beam Offset Switch
nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.
46 parts371 - 4 layers53.3 × 34.5 mm

- 4 layers91.1 × 53.6 mm

Parallel2usb
tomverbeure/fake_parallel_printer
Capture traffic on parallel printer port to USB
46 parts95BSD-2-Clause - 4 layers105 × 47 mm

Pdu
azonenberg/latentred
Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch
46 parts36BSD-3-Clause - 4 layers44.5 × 22.5 mm

- 4 layers41.8 × 14.8 mm

Nrf52811 usb
alvarop/chaac
This is a work in progress for a wireless weather station project.
46 parts21MIT - 4 layers50.8 × 114.3 mm

Questions
How big is the DaughterBoard PCB?
It measures 24 × 36 mm and has 4 copper layers, 4.69 mm thick.
What parts does the DaughterBoard use?
46 parts, built around the IS31FL3193-DLS2-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DaughterBoard KiCad files?
From the rocketperson7/mgc-dwc repository on GitHub, at the commit this page was made from: the board is hardware/daughterBoard/daughterBoard.kicad_pcb and its schematic hardware/daughterBoard/daughterBoard-backups/daughterBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DaughterBoard design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).