
Sous carte F429i
robotronik/2017-electronique
Les schémas des cartes électroniques utilisées dans nos robots

Les schémas des cartes électroniques utilisées dans nos robots
Shield 75 is an open-source printed circuit board by robotronik, from the robotronik/2017-electronique repository on GitHub. It is a 2-layer board with 8 parts on 4 nets, routed with 38 tracks and 0 vias.
Its parts include 3 connectors, 2 capacitors, 1 resistor, 1 IC and 1 diode.
Les schémas des cartes électroniques utilisées dans nos robots
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | CONN_01X02 | Connect:bornier2 | P1, P2, P3 |
| 2 | C | Capacitors_SMD:C_0603_HandSoldering | C1, C2 |
| 1 | 78S75C_correctPin | TO_SOT_Packages_THT:TO-220_Neutral123_Horizontal | U1 |
| 1 | LED | LEDs:LED-3MM | D1 |
| 1 | R | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1 |

robotronik/2017-electronique
Les schémas des cartes électroniques utilisées dans nos robots
/Sous-Carte%20Asservissement%20(2A%2C%20moteurs%20CC).kicad_pcb.jpg?size=s&soon)
robotronik/2017-electronique
Les schémas des cartes électroniques utilisées dans nos robots

robotronik/2017-electronique
Les schémas des cartes électroniques utilisées dans nos robots

robotronik/2017-electronique
Les schémas des cartes électroniques utilisées dans nos robots

robotronik/2017-electronique
Les schémas des cartes électroniques utilisées dans nos robots
/Carte%20Alim.kicad_pcb.jpg?size=s&soon)
robotronik/2017-electronique
Les schémas des cartes électroniques utilisées dans nos robots

robotronik/2017-electronique
Les schémas des cartes électroniques utilisées dans nos robots

robotronik/2017-electronique
Les schémas des cartes électroniques utilisées dans nos robots

robotronik/2017-electronique
Les schémas des cartes électroniques utilisées dans nos robots
/LiPo_module.kicad_pcb.jpg?size=s&soon)
robotronik/2017-electronique
Les schémas des cartes électroniques utilisées dans nos robots

robotronik/2017-electronique
Les schémas des cartes électroniques utilisées dans nos robots


joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the robotronik/2017-electronique repository on GitHub, at the commit this page was made from: the board is Carte-Alimentation/AlimDetect/Shield_75.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask robotronik before reusing the design.