Skip to the content
2 layers220 × 11.5 mmProbe11.5x200, the printed circuit board in 3D

Probe pcb for 200mm raster dryer / 16 pcb-s, 8 sensors

Size
220 × 11.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
10
Pads
39
Tracks, vias
125, 30
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
16 May 2024
Updated
16 May 2024

Overview

Probe11.5x200 is an open-source printed circuit board by robotond, from the robotond/probe11.5x200 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 220 × 11.5 mm with 12 parts on 10 nets, routed with 125 tracks and 30 vias.

It belongs with the sensors and measurement boards of this library.

README

README.md

probe11.5x200

Probe pcb for 200mm raster dryer / 16 pcb-s, 8 sensors

Parts

12
QtyValueFootprintReferences
8SBLibrary:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8
2CN10Library:PinHeader_2x05_P2.54mm_VerticalJ1, J2
110kLibrary:NTC_5x2TH1
1~Library:PCB11x220PCB1

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the Probe11.5x200 PCB?

It measures 220 × 11.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Probe11.5x200 use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Probe11.5x200 KiCad files?

From the robotond/probe11.5x200 repository on GitHub, at the commit this page was made from: the board is probe11.5x200.kicad_pcb and its schematic probe11.5x200.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Probe11.5x200 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).