2 layers66.9 × 74.5 mm
2 layers110 × 45 mm
Peripheral board
robot-mitya/hardware3Mitya's III KiCad files
- Size
- 110 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 19
- Pads
- 56
- Tracks, vias
- 149, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Nov 2017
- Updated
- 8 Nov 2017
Overview
Peripheral board is an open-source printed circuit board by robot-mitya, from the robot-mitya/hardware3 repository on GitHub. It is a 2-layer board of 110 × 45 mm with 20 parts on 19 nets, routed with 149 tracks and 0 vias.
Its parts include 8 resistors, 6 connectors and 2 transistors.
README
README.mdhardware3
Mitya's III KiCad files
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Jumper | Wire_Connections_Bridges:WireConnection_0.80mmDrill | JP1, JP2, JP3 |
| 2 | 10K | Resistors_SMD:R_1206_HandSoldering | R5, R8 |
| 2 | 1K | Resistors_SMD:R_1206_HandSoldering | R6, R7 |
| 2 | 220K | Resistors_SMD:R_1206_HandSoldering | R2, R4 |
| 2 | 470K | Resistors_SMD:R_1206_HandSoldering | R1, R3 |
| 2 | IRLR8113 | TO_SOT_Packages_SMD:TO-252-2_Rectifier | Q1, Q2 |
| 1 | 4WD controller | Connectors_JST:JST_EH_B05B-EH-A_05x2.50mm_Straight | J3 |
| 1 | Arduino Ports | Connectors_JST:JST_EH_B04B-EH-A_04x2.50mm_Straight | J2 |
| 1 | Head | Connectors_JST:JST_EH_B04B-EH-A_04x2.50mm_Straight | J4 |
| 1 | LED1 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | J5 |
| 1 | LED2 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | J6 |
| 1 | Power | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_3pol | J1 |
| 1 | UsbToUartX2 | DmitryDzz:UsbToUartX2 | M1 |
Questions
How big is the Peripheral board PCB?
It measures 110 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Peripheral board use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Peripheral board KiCad files?
From the robot-mitya/hardware3 repository on GitHub, at the commit this page was made from: the board is peripheral-board/peripheral-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Peripheral board design in my own project?
Its repository states no licence, so its author keeps all rights: ask robot-mitya before reusing the design.
Similar boards
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772