- Size
- 71.8 × 54.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 18
- Pads
- 113
- Tracks, vias
- 125, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2015
- Updated
- 15 Dec 2023
Overview
Normal is an open-source printed circuit board by robot-head, from the robot-head/PixelPusher-Ethernet-Extender-Shield repository on GitHub. It is a 2-layer board of 71.8 × 54.6 mm with 17 parts on 18 nets, routed with 125 tracks and 0 vias.
README
README.mdPixelPusher-Ethernet-Extender-Shield
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | AB2_RJ45 | ab2_connector:AB2_RJ45_VERT_UNSHIELDED | RJ1, RJ2, RJ3, RJ4, RJ5, RJ6, RJ7, RJ8 |
| 8 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P1, P2, P3, P4, P5, P6, P7, P8 |
The 16 most common of 17 parts.
More from robot-head/PixelPusher-Ethernet-Extender-Shield
1- 2 layers34 × 17 mm

Similar boards
- 2 layers50 × 35 mm

- 2 layers139.7 × 62.2 mm

- 2 layers29.2 × 55.9 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm

- 2 layers56.3 × 55.7 mm

StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm

SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm

- 2 layers36 × 51 mm

Questions
How big is the Normal PCB?
It measures 71.8 × 54.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Normal use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Normal KiCad files?
From the robot-head/PixelPusher-Ethernet-Extender-Shield repository on GitHub, at the commit this page was made from: the board is Normal Polarity/Normal.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Normal design in my own project?
Its repository states no licence, so its author keeps all rights: ask robot-head before reusing the design.