2 layers105.5 × 139.7 mm
Proletariat
robopuff/proletariat
Pro-micro through the hole numpad/macropad with rotary encoder and OLED
71 parts2CC-BY-SA-4.0
2 layers77.7 × 115.8 mm
Pro-micro through the hole numpad/macropad with rotary encoder and OLED
- Size
- 77.7 × 115.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 28
- Pads
- 195
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Oct 2021
- Updated
- 29 Oct 2021
Overview
Plate is an open-source printed circuit board by robopuff, from the robopuff/proletariat repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 77.7 × 115.8 mm with 33 parts on 28 nets.
It belongs with the keyboards and input and lEDs and displays boards of this library.
README
README.mdProletariat
Easy to build, pro-micro (nice!nano for bluetooth) through the hole numpad/macropad with rotary encoders and 0.91" OLED support.
Required components
- 24 or 25x 1N4148 axial diodes
- 25 if battery pack and on/off switch included
- 1x tactile switch (reset)
- 1x slide switch (on/off, 450302014072-ND recommended)
- Battery holder and 3.3V rechargable battery
- 2xEC12/EC16 Rotary Encoders with knobs (Kilo International for the ultimate look and feel)
- Pro Micro compatible MCU
- For BT use nice!nano
- For anything else, do not connect battery pack, or check pinouts for further compatibility
- One or none of the supported OLED screens
- 0.91" SSD1306 I2C OLED
- 27x Kailh hot swappable sockets
- 24x MX-compatible switches & keycaps
- Supports 3x2u
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | SW_Push | Switch_Keyboard_Kailh:SW_Hotswap_Kailh_1.00u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +8 |
| 6 | MountingHole | random-keyboard-parts:Generic-Mounthole | H2, H5, H7, H8, H9, H10 |
| 2 | SW_Push | Switch_Keyboard_Kailh:SW_Hotswap_Kailh_2.00u_Rotated | SW26, SW27 |
| 1 | SW_Push | Switch_Keyboard_Kailh:SW_Hotswap_Kailh_2.00u | SW7 |
Questions
How big is the Plate PCB?
It measures 77.7 × 115.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Plate use?
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Plate KiCad files?
From the robopuff/proletariat repository on GitHub, at the commit this page was made from: the board is plate/plate.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Plate design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from robopuff/proletariat
1Similar boards
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm
CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431 - 2 layers65 × 30 mm
