4 layers195 × 140 mm
4 layers65 × 40 mm
DLSSensorModule
robertpuccinelli/pcb_dlsMini dynamic light scattering board design
- Size
- 65 × 40 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 82
- Pads
- 239
- Tracks, vias
- 372, 52
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Jul 2023
- Updated
- 14 Jul 2023
Overview
DLSSensorModule is an open-source printed circuit board by robertpuccinelli, from the robertpuccinelli/pcb_dls repository on GitHub. It is a 4-layer board of 65 × 40 mm with 73 parts on 82 nets, routed with 372 tracks and 52 vias.
It is built around the AD9245BCPZ-65, 501MLFT and LP5907MFX-3.1. Its parts include 30 resistors, 24 capacitors, 6 ICs, 2 connectors and 1 diode.
Main components
3
AD9245BCPZ-65
LFCSP-32(5x5)-40℃~+85℃ 1 1.6LSB 14 2.7V~3.6V 65MHz LFCSP-32(5x5) Analog to Digital Converters (ADC) ROHSAnalog DevicesAnalog To Digital Converters (ADC)
501MLFT
SOIC-80℃~+70℃ 1 160MHz 25ps 3V~5.25V Built-in phase-locked loop External Not supported TTL SOIC-8 Clock Generators, PLLs, Frequency Synthesizers ROHSRenesas ElectronicsClock Generators, PLLs, Frequency Synthesizers
LP5907MFX-3.1
SOT-23-5-40℃~+125℃@(Tj) 1 250mA 250mV@(250mA) 25uA 3.1V 5.5V 6.5uVrms 82dB@(1kHz) Fixed Positive Short Circuit Protection、Thermal Shutdown SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 220R | Resistor_SMD:R_0603_1608Metric | R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28 +4 |
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C8, C9, C10, C12, C17, C18, C20, C23 |
| 8 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C6, C14, C16, C21, C22, C24 |
| 8 | 50R | Resistor_SMD:R_0603_1608Metric | R1, R2, R5, R6, R7, R10, R11, R12 |
| 4 | Mount | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 100pF | Capacitor_SMD:C_0603_1608Metric | C5, C13, C19 |
| 3 | 10nF | Capacitor_SMD:C_0603_1608Metric | C4, C7, C15 |
| 2 | TestPoint | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1, TP2 |
| 1 | 10K | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | 110K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 16MHz Resonator | Crystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | 3pF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 501MLFT | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | 68uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 887K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | AD9245BCPZ-65 | Custom_Footprints:AD9245BCPZ-80 | U6 |
| 1 | LP5907MFX-3.1 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | LT8410EDC-TRMPBF | Custom_Footprints:LT8410EDC-TRMPBF | U1 |
| 1 | Logo_Open_Hardware_Small | Custom_Footprints:OSHW_logo | LOGO1 |
| 1 | MIC920 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U4 |
| 1 | MICRORB-10020 | Custom_Footprints:CASE_512AK | D1 |
| 1 | OPA855xDSG | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U3 |
| 1 | Pi Header | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
Questions
How big is the DLSSensorModule PCB?
It measures 65 × 40 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DLSSensorModule use?
73 parts, built around the AD9245BCPZ-65, 501MLFT and LP5907MFX-3.1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DLSSensorModule KiCad files?
From the robertpuccinelli/pcb_dls repository on GitHub, at the commit this page was made from: the board is DLSSensorModule.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DLSSensorModule design in my own project?
Its repository states no licence, so its author keeps all rights: ask robertpuccinelli before reusing the design.
Similar boards
- 6 layers145 × 355 mm
Backplane
stockmann-lab/shim_amp_hardware_linear
Hardware related to open-source shim amplifier development for MRI research
529 parts2 - 4 layers50.8 × 38.1 mm
- 4 layers60 × 33 mm
- 4 layers99.6 × 99.6 mm
Control Module
benanderman/spork-8
An 8-bit CPU, made with TTL chips on custom, modular PCBs. Includes board designs, and Arduino code to program its instruction set and programs.
73 parts61MIT - 4 layers48.8 × 53.1 mm
ESC Board
FPV-Drone-STM32F411/DroneController
All-in-one FPV drone PCB with integrated flight controller, PDB, and ESCs built around STM32F411.
73 parts60 - 4 layers65.4 × 34.4 mm
- 4 layers50 × 55 mm
