2 layers116.5 × 57 mm
4 layers77.5 × 42.5 mm
Capper Decapper
robertpuccinelli/pcb_czbRandom PCB designs from mini projects at czb
- Size
- 77.5 × 42.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 91
- Pads
- 450
- Tracks, vias
- 2,006, 210
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Jul 2023
- Updated
- 14 Jul 2023
Overview
Capper Decapper is an open-source printed circuit board by robertpuccinelli, from the robertpuccinelli/pcb_czb repository on GitHub. It is a 4-layer board of 77.5 × 42.5 mm with 86 parts on 91 nets, routed with 2,006 tracks and 210 vias.
It is built around the V7805-1500R, INA2143U and DRV8833RTYR, with the AP1501A-K5G, 74AHC08D and MAX6018BEUR16+T among its other parts. Its parts include 37 capacitors, 21 resistors, 19 ICs, 3 connectors and 2 diodes.
Main components
6V7805-1500R
--40℃~+85℃ 1.5A 11.5mm 17.5mm 340kHz 45mVp-p 5V 6.5V~18V 93% 9mm ±2% - DC-DC Power Modules ROHSCUIDC-DC Power Modules
INA2143U
SOIC-14-18V~18V -40℃~+85℃ 100uV 1MHz 1uV/℃ 2 25mA 36V 36V 45nV/√Hz@10Hz 5V/us 86dB 950uA 9us Capacitive load driving、Integrated precision resistor network SOIC-14 Differential Amplifiers ROHSTexas InstrumentsDifferential Amplifiers
DRV8833RTYR
QFN-16-EP(4x4)-40℃~+85℃ 1.5A 2 2.7V~10.8V 2.7V~10.8V 360mΩ Bipolar Driver Yes QFN-16-EP(4x4) Stepper Motor Driver ROHSTexas InstrumentsStepper Motor Driver
AP1501A-K5G
TO-263-5-20℃~+85℃ 1 1.23V~37V 150kHz 4.5V~40V 5A 5mA Adjustable Buck Buck Built-in No TO-263-5 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters74AHC08D
SOIC-14-40℃~+125℃ 1.5V~3.85V 1.9V、2.9V、4.4V 2 2V~5.5V 2uA 4 500mV~1.65V 550mV 7.9ns@5V,50pF 74AHC Series 8mA 8mA AND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates
MAX6018BEUR16+T
SOT-23-40℃~+85℃@(Ta) 1.6V 1.8V~5.5V 150uVrms 1mA 40uVp-p 50ppm/℃ 6uA Fixed Series ±0.4% SOT-23 Voltage Reference ROHSMaxim Integrated (Analog Devices)Voltage Reference
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C6, C8, C12, C14, C19, C23, C28, C29, C34, C35, C36, C37 |
| 8 | 0.05R | Resistor_SMD:R_1206_3216Metric | R1, R6, R7, R10, R12, R15, R16, R19 |
| 8 | 20k | Resistor_SMD:R_0603_1608Metric | R2, R5, R8, R9, R13, R14, R17, R18 |
| 8 | 22nF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C7, C9, C13, C15, C22, C24 |
| 8 | INA214 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U1, U4, U5, U8, U9, U12, U13, U18 |
| 6 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T | C17, C20, C30, C31, C32, C33 |
| 4 | 10nF | Capacitor_SMD:C_0603_1608Metric | C5, C11, C18, C27 |
| 4 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C4, C10, C16, C25 |
| 4 | 74AHC08 | CustomFootprints:PVQFN-14 | U2, U6, U10, U15 |
| 4 | DRV8833RTY | Package_DFN_QFN:WQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm | U3, U7, U11, U16 |
| 2 | 330R | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | MountingHole | MountingHole:MountingHole_3mm | MH1, MH2 |
| 2 | Schottky | Diode_SMD:D_SMA | D1, D2 |
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 0.33uF | Capacitor_SMD:C_0603_1608Metric | C21 |
| 1 | 14.2K | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 22uH | Inductor_SMD:L_Wuerth_HCI-1365 | L1 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 5k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | AP1501A | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U19 |
| 1 | MAX6018BEUR16 | Package_TO_SOT_SMD:SOT-23 | U17 |
| 1 | Motor_Power | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J2 |
| 1 | Pi Control Signals | Connector_PinSocket_2.54mm:PinSocket_1x24_P2.54mm_Vertical | J1 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Screw_Term | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J3 |
| 1 | V7805-1500R | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U14 |
Questions
How big is the Capper Decapper PCB?
It measures 77.5 × 42.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Capper Decapper use?
86 parts, built around the V7805-1500R, INA2143U, DRV8833RTYR and AP1501A-K5G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Capper Decapper KiCad files?
From the robertpuccinelli/pcb_czb repository on GitHub, at the commit this page was made from: the board is CapperDecapper/Capper Decapper/Capper Decapper.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Capper Decapper design in my own project?
Its repository states no licence, so its author keeps all rights: ask robertpuccinelli before reusing the design.
More from robertpuccinelli/pcb_czb
3- 2 layers53.3 × 66 mm
- 2 layers36 × 20.5 mm
Capper Decapper Solenoid Correction
robertpuccinelli/pcb_czb
Random PCB designs from mini projects at czb
8 parts
Similar boards
- 4 layers73.9 × 84.5 mm
Aei
Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems
54 parts51 - 2 layers10.6 × 18.5 mm
Asmartcap xMoto
xpix/XMOTO_TINYAVR
This code is designed for a motor controller and has merged the PID code of Josh Kopel with the code of the Makerbot servo-controller board. This code can be used on some boards by changing some values.
21 parts6 - 4 layers306 × 244 mm
- 4 layers98.7 × 99.9 mm
- 4 layers145.5 × 89.6 mm
- 4 layers133 × 93 mm
Project GP8B
JonathSpirit/GP8B
G_Processor8Bits a homemade without any microcontroller 8bits processor
110 parts - 2 layers
- 2 layers69 × 72 mm
MMv3
MrCroesus/MMv3
MMv3 is the 3rd generation robot platform used to teach the IEEE Micromouse DeCal at UC Berkeley. It was designed with usability, manufacturability, size, and cost in mind.
47 parts16Apache-2.0