Skip to the content
2 layers88.4 × 25.4 mmBrakeOnly, the printed circuit board in 3D

New Lights for new Trike Body

Size
88.4 × 25.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
7
Pads
31
Tracks, vias
0, 0
Pours
7
Routed
Not yet
KiCad
KiCad 6 (file 20211014)
Created
15 Jun 2024
Updated
26 Jun 2024

Overview

BrakeOnly is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/NewTrikeLights repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 88.4 × 25.4 mm with 8 parts on 7 nets.

Its parts include 5 diodes, 2 connectors and 1 resistor.

README

README.md

NewTrikeLights

New Lights for new Trike Body

This project contains a set of new (replacement) lights for my trike. Including headlights, taillights, brake lights, and turn signals, along with marker lights.

Parts

8
QtyValueFootprintReferences
5LEDLED_SMD:LED_Cree-XBD101, D102, D103, D104, D105
16.2Resistor_SMD:R_2010_5025MetricR101
1Brake+SpadeLugs:197054303J101
1C-SpadeLugs:197054303J0

More from RobertPHeller/NewTrikeLights

7
  • 2 layers88.4 × 25.4 mmHeadlightSwitch, the printed circuit board in 3D

    HeadlightSwitch

    RobertPHeller/NewTrikeLights

    New Lights for new Trike Body

    26 partsCC0-1.0
  • 2 layers88.4 × 25.4 mmTurnSignalSwitch, the printed circuit board in 3D

    TurnSignalSwitch

    RobertPHeller/NewTrikeLights

    New Lights for new Trike Body

    23 partsCC0-1.0
  • 2 layers88.4 × 25.4 mmBlinkTaillightBoard, the printed circuit board in 3D

    BlinkTaillightBoard

    RobertPHeller/NewTrikeLights

    New Lights for new Trike Body

    20 partsCC0-1.0
  • 2 layers88.4 × 25.4 mmTaillightBoard, the printed circuit board in 3D

    TaillightBoard

    RobertPHeller/NewTrikeLights

    New Lights for new Trike Body

    19 partsCC0-1.0
  • 2 layers88.4 × 25.4 mmHeadlightboard, the printed circuit board in 3D

    Headlightboard

    RobertPHeller/NewTrikeLights

    New Lights for new Trike Body

    18 partsCC0-1.0
  • 2 layers88.4 × 25.4 mmMarkerTurnSignal, the printed circuit board in 3D

    MarkerTurnSignal

    RobertPHeller/NewTrikeLights

    New Lights for new Trike Body

    13 partsCC0-1.0
  • 2 layers19 × 25.4 mmBiFlasher, the printed circuit board in 3D

    BiFlasher

    RobertPHeller/NewTrikeLights

    New Lights for new Trike Body

    12 partsCC0-1.0

Similar boards

  • 2 layers20.5 × 24.8 mmPi interface, the printed circuit board in 3D

    Pi interface

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    8 parts3.7k
  • 2 layers59.9 × 25.7 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    8 parts1kGPL-3.0
  • 2 layers52 × 12.6 mmUSB, the printed circuit board in 3D

    USB

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    8 parts960Apache-2.0
  • 2 layers87.5 × 48.5 mm7 input macropad, the printed circuit board in 3D

    7 input macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    8 parts915
  • 2 layers36.2 × 63.1 mmPicoMemcard pico, the printed circuit board in 3D

    PicoMemcard pico

    dangiu/PicoMemcard

    Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

    8 parts694GPL-3.0
  • 2 layers36 × 10 mmPCB4-PWR BTN Rev.A, the printed circuit board in 3D

    PCB4-PWR BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    8 parts578Apache-2.0

Questions

How big is the BrakeOnly PCB?

It measures 88.4 × 25.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BrakeOnly use?

8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BrakeOnly KiCad files?

From the RobertPHeller/NewTrikeLights repository on GitHub, at the commit this page was made from: the board is BrakeOnly/BrakeOnly.kicad_pcb and its schematic BiFlasher/BiFlasher.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BrakeOnly design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).