Skip to the content
2 layers115.6 × 130.8 mmESP32-HalfSiding, the printed circuit board in 3D

ESP32 based LCC Boards

Size
115.6 × 130.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
56
Nets
98
Pads
378
Tracks, vias
410, 62
Pours
2
Routed
Yes
KiCad
KiCad 3
Created
28 Dec 2022
Updated
22 Oct 2026

Overview

ESP32-HalfSiding is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/ESP32-LCC repository on GitHub. It is a 2-layer board of 115.6 × 130.8 mm with 56 parts on 98 nets, routed with 410 tracks and 62 vias.

It is built around the TC4428COA, LM2574N-5.0 and MCT6H, with the 74HCT00D, MCP23017-E/SS and RJ45 among its other parts. Its parts include 13 ICs, 7 capacitors, 6 resistors, 5 diodes and 5 connectors. It belongs with the ESP32 and RISC-V boards of this library.

Main components

8

README

ESP32-16LedDriver/README.md

ESP32-16LedDriver

16 on/off LED Driver board using a MCP23017.

Parts

56
QtyValueFootprintReferences
4MountingHole_2-5mm_RevA_Date21Jun2010MountingHole_2-5mm_RevA_Date21Jun2010MH, MH, MH, MH
3.1 ufC1C1, C6, C7
21.5K OhmsDIP-16__300RP1, RP2
210 OhmsR1R3, R5
210K OhmsSIL-5RR1, RR2
210K OhmsR1R4, R6
260 OhmsR1R1, R2
2BRIDGEXKBLD4, D5
2CA A CK3PosJumperJP2, JP3
2CA B CK3PosJumperJP4, JP5
2In Track1 Outbornier2T3, T6
2MCT6HDIP-8__300IC1, IC2
2RJ45RJ45_8N-SJ1, J2
2SB240EDO-35D1, D2
2TBD62X83ADIP-18__300U5, U6
2TC4428DIP-8__300U7, U8
1+ 15 in -ScrewTerm2.54-2T1
1+ 15 out -ScrewTerm2.54-2T2
10 1 2pin_array_3x2P1
115 uf 15VC1.5V8VC2
122 uf 100VC1-3V8C5
1220 uf 25VC1-3V8C4
1330 uhPE-LowProfileL1
147 nfC1C3
174HCT00DIP-14__300U9
1C A0 A1 A2 A3 A4 A5 A6 A7ScrewTerm_2.54-9P2
1C B0 B1 B2 B3 B4 B5 B6 B7ScrewTerm_2.54-9P3
1ESP32_DEVKIT_C or TTGO-T1ESP32-Devkit-CU0
1LM2574N-5.0DIP-8__300U3
1MCP23017DIP-28__300U4
1Motor 1ScrewTerm_2.54-5T4
1Motor 2ScrewTerm_2.54-5T5
1SB160-E3/54DO-41D3
1SN65HVD233-HTDIP-8__300U2
1TCAN332DRSOIC-8_NU1
1TTGO-T1TIGO-T1U0A
1TerminationPIN_ARRAY_2X2JP1

More from RobertPHeller/ESP32-LCC

12

Similar boards

  • 2 layers149.9 × 128.3 mmPocketBeaglePWMHalfSiding, the printed circuit board in 3D

    PocketBeaglePWMHalfSiding

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    62 parts24
  • 2 layers184.1 × 144.1 mmESP32ControlStand, the printed circuit board in 3D

    ESP32ControlStand

    RobertPHeller/2ndGenLocoControlStand

    Model 2nd Generation Diesel Locomotive Control Stand

    120 parts3GPL-3.0
  • 2 layers126.8 × 117.6 mmBBBCommandStation, the printed circuit board in 3D

    BBBCommandStation

    RobertPHeller/CommandStationsAndBoosters

    Command Stations and Boosters

    71 parts
  • 2 layers161.1 × 85 mmTurnoutBoss, the printed circuit board in 3D

    TurnoutBoss

    JimKueneman/TurnoutBoss

    This repository contains all the design files, manuals, firmware, production information for the LCC TurnoutBoss Node

    198 parts1
  • 2 layers82 × 42 mmCct controller, the printed circuit board in 3D

    Cct controller

    controlol/led-driver-constant-current-esphome

    KiCad design for a constant current driver with Mean Well dimmable LED driver and ESPHome firmware

    42 parts
  • 2 layers114.3 × 106.7 mmSTM32F303-RIR4, the printed circuit board in 3D

    STM32F303-RIR4

    RobertPHeller/STM32F303-RIR4

    STM32F303 Nucleo Baseboard for Aztrax RIR4 shield

    47 partsBSD-2-Clause
  • 2 layers195 × 148 mmKeyModule R, the printed circuit board in 3D

    KeyModule R

    cho45/Keble

    Keyboard project

    110 parts5

Questions

How big is the ESP32-HalfSiding PCB?

It measures 115.6 × 130.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32-HalfSiding use?

56 parts, built around the TC4428COA, LM2574N-5.0, MCT6H and 74HCT00D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32-HalfSiding KiCad files?

From the RobertPHeller/ESP32-LCC repository on GitHub, at the commit this page was made from: the board is ESP32-HalfSiding/ESP32-HalfSiding.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32-HalfSiding design in my own project?

Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.