Skip to the content
2 layers70.1 × 76.7 mmLinear power booster, the printed circuit board in 3D

Linear guitar signal booster with BJT amplification, true bypass switching, and power input protection.

Size
70.1 × 76.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
27
Pads
70
Tracks, vias
82, 2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 Jun 2025
Updated
25 Jun 2025

Overview

Linear power booster is an open-source printed circuit board by robertengineerr, from the robertengineerr/linear_power_booster repository on GitHub. It is a 2-layer board of 70.1 × 76.7 mm with 21 parts on 27 nets, routed with 82 tracks and 2 vias.

It is built around the SJ-63073E and FS57003PLT2B2M2QE. Its parts include 4 capacitors, 4 resistors, 3 connectors, 1 IC and 1 diode. It belongs with the audio and music boards of this library.

Main components

2

README

README.md

Linear Power Booster | Guitar Pedal

Linear guitar signal booster with BJT amplification, true bypass switching, and power input protection.

image

View PCB in KiCanvas

View Schematic in KiCanvas

BJT Amplifier This is the core amplification stage. A single NPN BJT (Q1) amplifies the input signal from a guitar or similar audio source. Capacitors C1 and C2 act as AC coupling (DC-blocking) caps, allowing only the AC signal through. R1 and R2 form a voltage divider to bias the base of Q1, while R3 sets emitter current for gain stability. The amplified signal is output through C2, with a variable resistor (RV1) used to control output volume. This design provides a clean linear boost to the input signal.

Power This section manages power input and protection. It accepts either a 9V barrel jack or battery input, with diode D2 preventing reverse polarity damage. The capacitor C3 provides basic filtering to smooth out voltage spikes, and the TVS0500DRV IC (U1) protects downstream components from overvoltage by clamping any input above ~9V. The design ensures safe and clean power delivery to the circuit.

Bypass System This section allows toggling between the amplified signal and the unprocessed (dry) signal. It uses a 3PDT switch (S1) to route the signal either through the amplifier or directly from input to output. Capacitor C4 provides AC coupling for the bypassed signal. This system is commonly used in audio pedals to allow true bypass functionality, preserving the original signal when the effect is disengaged.

Parts

21
QtyValueFootprintReferences
3100nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC1, C2, C4
3MountingHole_3.2mm_M3MountingHole:MountingHole_3.2mm_M3M3, M3, M3
2SJ-63073EAUDIO JACK, 6.35 MM, HORIZONTAL,:CUI_SJ-63073EJ4, J5
1Symbol:LayerMarker_4_6.35x2.54mm_TextH1mm_P1.27mmrobertengineer.com
10.3VDiode_SMD:D_SMBD2
1100kΩPotentiometers PANEL CONTROL - 9MM-ST-CARBON:PTV09A4030FA104RV1
110kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
11µFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC3
1390ΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4
1430kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
143kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3
19VBattery:BatteryHolder_Eagle_12BH611-GRBT1
19VConnector_BarrelJack:BarrelJack_CUI_PJ-079BH_HorizontalJ1
19VPackage_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmU1
1FS57003PLT2B2M2QEStomp_Switch:SW_FS57003PLT2B2M2QES1
1NPNPackage_TO_SOT_THT:TO-92_InlineQ1

Similar boards

  • 2 layers110 × 48 mmJack pedal, the printed circuit board in 3D

    Jack pedal

    GuitarML/GuitarPedalPCBs

    Collection of KiCad circuit board designs for guitar pedals you can build yourself.

    86 parts62MIT
  • 4 layers82.4 × 72.2 mmScream bean rev b, the printed circuit board in 3D

    Scream bean rev b

    Batterhead221/Scream_Bean

    This revision is intended to improve the original SCREAM_BEAN layout and move the board closer to a clean, buildable pedal PCB.

    39 parts
  • 2 layers3pdt, the printed circuit board in 3D

    3pdt

    Hajto/3pdt-breakeout-board

    3PDT switch breakout board for guitar pedalds.

    10 parts
  • 4 layers62 × 116 mmPedal, the printed circuit board in 3D

    Pedal

    mmc305/Guitar-Pedal

    33 parts
  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0

Questions

How big is the Linear power booster PCB?

It measures 70.1 × 76.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Linear power booster use?

21 parts, built around the SJ-63073E and FS57003PLT2B2M2QE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Linear power booster KiCad files?

From the robertengineerr/linear_power_booster repository on GitHub, at the commit this page was made from: the board is linear_power_booster.kicad_pcb and its schematic linear_power_booster.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Linear power booster design in my own project?

Its repository states no licence, so its author keeps all rights: ask robertengineerr before reusing the design.