Skip to the content
PCBKitNew board
2 layers59.7 × 67.9 mmEeprom programmer, the printed circuit board in 3D

Eeprom programmer

rmheuer/eeprom-programmer

Programmer for AT28C64 and 24LC32 EEPROMs.

Size
59.7 × 67.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
54
Pads
100
Tracks, vias
169, 1
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
25 May 2024
Updated
8 Sep 2026

Overview

Eeprom programmer is an open-source printed circuit board by rmheuer, from the rmheuer/eeprom-programmer repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 59.7 × 67.9 mm with 9 parts on 54 nets, routed with 169 tracks and 1 via.

It is built around the 74HCT164D. Its parts include 3 resistors, 3 ICs, 1 diode, 1 transistor and 1 connector. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

eeprom-programmer

Programmer for AT28C64 and 24LC32 EEPROMs.

Schematic

Assembled PCB:
PCB in KiCad:

Parts

9
QtyValueFootprintReferences
22k2Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
274HCT164Package_DIP:DIP-14_W7.62mm_SocketU1, U2
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
128-6553-10_aries_zif:28655310J1
12N3906Package_TO_SOT_THT:TO-92_InlineQ1
1LEDLED_THT:LED_D3.0mmD1
1Teensy2.0_(Arduino)teensy:Teensy2.0U3

Questions

How big is the Eeprom programmer PCB?

It measures 59.7 × 67.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Eeprom programmer use?

9 parts, built around the 74HCT164D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Eeprom programmer KiCad files?

From the rmheuer/eeprom-programmer repository on GitHub, at the commit this page was made from: the board is hardware/EEPROM Programmer.kicad_pcb and its schematic hardware/EEPROM Programmer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Eeprom programmer design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

Similar boards

  • 2 layers365.1 × 203.2 mmDIAG, the printed circuit board in 3D

    DIAG

    Nakazoto/CenturionComputer

    This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.

    150 parts172
  • 4 layers99.8 × 44.2 mmYm3812 synth new, the printed circuit board in 3D

    Ym3812 synth new

    89Mods/YM3812-dual-synth

    MIDI synthesizer built from two YM3812s for 18-voice mono or 9-voice stereo.

    40 parts1Apache-2.0
  • 2 layers160 × 100 mmExordisk v1, the printed circuit board in 3D

    Exordisk v1

    roberto314/kees1948_Boards

    kees 1948 Uniflex Remake

    119 parts1
  • 2 layers80 × 60 mmTommyPROM schematics, the printed circuit board in 3D

    TommyPROM schematics

    TomNisbet/TommyPROM

    Simple Arduino-based EEPROM programmer

    13 parts187
  • 4 layers142 × 62 mmRAM, the printed circuit board in 3D

    RAM

    rraider/Seminarkurs2021

    Entwicklung eines turingvollständigen, primitiven Microcontroller in der Software Digital

    44 parts7MIT
  • 2 layers106.7 × 99.1 mmExp8b, the printed circuit board in 3D

    Exp8b

    techav-homebrew/Wrap030

    Homebrew 68030 computer

    43 parts5
  • 2 layers100 × 83 mmBalancer, the printed circuit board in 3D

    Balancer

    alangecker/yabalancer

    88 parts
  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT