Skip to the content
2 layers42 × 55 mmSST SCB, the printed circuit board in 3D

Serial servo test board and software

Size
42 × 55 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
19
Pads
117
Tracks, vias
168, 0
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
16 Mar 2024
Updated
20 Jul 2024

Overview

SST SCB is an open-source printed circuit board by rmf-hru-wg, from the rmf-hru-wg/SerialServoTester repository on GitHub. It is a 2-layer board of 42 × 55 mm with 37 parts on 19 nets, routed with 168 tracks and 0 vias.

It is built around the MJ-179PH. Its parts include 26 connectors, 4 resistors, 2 ICs and 1 capacitor.

Main components

1

README

README.md

Serial Servo Tester

シリアルサーボを動作させるための回路

  • SST-Single: TTLとRS485のコネクタを1つずつ出している。KONDOのDual USBアダプターと同様にサーボの設定に使える。
  • SST-SCB: 3ピンTTLのみで24ポート分生やしている。PythonなどPCからロボットを動かすための基板。

Parts

37
QtyValueFootprintReferences
24Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1, J2, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23 +8
45.1kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R3, R4, R5
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
1CCapacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mmC1
1Conn_01x02_PinConnector_JST:JST_VH_B2P-VH_1x02_P3.96mm_VerticalJ25
1FT231XS_BreakoutFootprintLibrary:DIP-18_500_ELLU1
1LT1785AxN8Package_DIP:DIP-8_W7.62mm_Socket_LongPadsU2
1MJ-179PHConnector_BarrelJack:BarrelJack_HorizontalJ27

More from rmf-hru-wg/SerialServoTester

1
  • 2 layers45 × 35 mmSST Single, the printed circuit board in 3D

    SST Single

    rmf-hru-wg/SerialServoTester

    Serial servo test board and software

    17 parts

Similar boards

  • 8 layers100.2 × 55 mmJetson nano baseboard, the printed circuit board in 3D

    Jetson nano baseboard

    antmicro/jetson-nano-baseboard

    Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX

    391 parts548Apache-2.0
  • 8 layers118 × 100 mmKria k26-devboard, the printed circuit board in 3D

    Kria k26-devboard

    antmicro/kria-k26-devboard

    Open source AMD Xilinx Kria UltraScale+ SoM baseboard

    660 parts83Apache-2.0
  • 8 layers110 × 90 mmLpddr4-test board, the printed circuit board in 3D

    Lpddr4-test board

    antmicro/lpddr4-test-board

    Experimental development board interfacing Xilinx Kintex-7 FPGA with LPDDR4 SDRAM

    497 parts57Apache-2.0
  • 12 layers152.9 × 90 mmData center rdimm ddr4-tester, the printed circuit board in 3D

    Data center rdimm ddr4-tester

    antmicro/rdimm-ddr4-tester

    Experimental platform built around Xilinx Kintex-7 FPGA for development and customization of RAM controllers supporting RDIMM DDR4 RAM modules used in data centers.

    691 parts32Apache-2.0
  • 2 layers100 × 100 mmDRAM Tester x1x4-lcd, the printed circuit board in 3D

    DRAM Tester x1x4-lcd

    goriponsoft/DRAM-Tester-x1x4-lcd

    DRAM tester that supports 4116/8265/4164/41256/4532/4416/4464/44256/4400 and is equipped with an LCD.

    53 parts9GPL-3.0
  • 2 layers100 × 100 mmZ80cpupio, the printed circuit board in 3D

    Z80cpupio

    inufuto/Z80TVGA

    27 parts6
  • 4 layers150 × 50 mmIct baseboard, the printed circuit board in 3D

    Ict baseboard

    antmicro/ict-baseboard

    PCB design for implementing In-Circuit Testing of other PCBs via an USB-enabled host

    277 parts4Apache-2.0
  • 2 layers80 × 20.5 mmLz1-led driver, the printed circuit board in 3D

    Lz1-led driver

    antmicro/flickerless-led-driver

    This project contains open hardware design files for a PCB supporting a pair of infrared (IR) LEDs in an LZ1 LuxiGen package from OSRAM.

    44 parts2Apache-2.0

Questions

How big is the SST SCB PCB?

It measures 42 × 55 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SST SCB use?

37 parts, built around the MJ-179PH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SST SCB KiCad files?

From the rmf-hru-wg/SerialServoTester repository on GitHub, at the commit this page was made from: the board is SST-SCB/SST-SCB.kicad_pcb and its schematic SST-SCB/SST-SCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SST SCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask rmf-hru-wg before reusing the design.