2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers25.4 × 25.4 mm
Getting to Blinkey
- Size
- 25.4 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 6
- Pads
- 21
- Tracks, vias
- 25, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 21 Jan 2014
- Updated
- 21 Jan 2014
Overview
GTB is an open-source printed circuit board by rkrishnasanka, from the rkrishnasanka/GTB repository on GitHub. It is a 2-layer board of 25.4 × 25.4 mm with 7 parts on 6 nets, routed with 25 tracks and 2 vias.
Its parts include 2 resistors, 1 capacitor and 1 diode.
README
readme.mdFirst KiCAD project following the tutorial from Contextual Electronics[http://www.contextualelectronics.com]
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1K | SM1206 | R2 |
| 1 | 1u | SM1206 | C1 |
| 1 | 470K | SM1206 | R1 |
| 1 | 7555 | SO8N | TU1 |
| 1 | CR2132 | CR2032 | BT1 |
| 1 | LED | LED-1206 | D1 |
| 1 | VR | R1 | VR1 |
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
Questions
How big is the GTB PCB?
It measures 25.4 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GTB use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GTB KiCad files?
From the rkrishnasanka/GTB repository on GitHub, at the commit this page was made from: the board is GTB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GTB design in my own project?
Its repository states no licence, so its author keeps all rights: ask rkrishnasanka before reusing the design.