Skip to the content
2 layers55 × 67 mmArduino uno dev, the printed circuit board in 3D
Size
55 × 67 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
41
Pads
142
Tracks, vias
290, 94
Pours
5
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Oct 2025
Updated
12 Oct 2025

Overview

Arduino uno dev is an open-source printed circuit board by rithylim, from the rithylim/arduino-uno-dev-pcb repository on GitHub. It is a 2-layer board of 55 × 67 mm with 36 parts on 41 nets, routed with 290 tracks and 94 vias.

It is built around the ATMEGA328-PU, CH340K and USBLC6-2SC6. Its parts include 12 capacitors, 6 connectors, 4 ICs, 3 resistors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

Parts

36
QtyValueFootprintReferences
90.1uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC2, C3, C4, C7, C8, C9, C10, C11, C12
4MountingHole_PadMountingHole:MountingHole_2.2mm_M2_DIN965_PadH1, H2, H3, H4
2220RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R2
222pFCapacitor_THT:CP_Radial_Tantal_D4.5mm_P2.50mmC5, C6
2Conn_01x12_PinConnector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_VerticalJ5, J6
2LEDLED_THT:LED_D3.0mmD1, D2
10.33uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC1
110kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR7
116MHzCrystal:Crystal_HC49-4H_VerticalY1
1ATmega328-PPackage_DIP:DIP-28_W7.62mmU1
1CH340KPackage_SO:SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mmU3
1G***kibuzzard-68EA338Fkibuzzard-68EA338F
1ICSPConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ2
1Jack DCConnector_BarrelJack:BarrelJack_HorizontalJ1
1JumperConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1LM7805_TO220Package_TO_SOT_THT:TO-220-3_VerticalU2
1SS12D00G3SS12D10:SS12D10SW1
1SW_PushButton_Switch_THT:SW_PUSH_6mm_H5mmSW2
1UART InterfaceConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ4
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U4
1USB_BConnector_USB:USB_B_OST_USB-B1HSxx_HorizontalJ3

Similar boards

  • 2 layersG Love, the printed circuit board in 3D

    G Love

    AlexEsqu/G-Love

    [G-Love] est un projet de conception d’un système de vêtement électronique (wearable) porté sur les bras., intégrant des bandes LEDSs RGB réactives à l’environnement et aux mouvements du porteur.

    154 parts2
  • 2 layers70 × 55 mmKwl esp32, the printed circuit board in 3D

    Kwl esp32

    hpralfi/comfoair-esp32

    ESP32-Platine, um Zehnder ComfoAir, StorkAir WHR und Wernig G90 über RS232 in Home Assistant einzubinden (ESPHome, ohne Cloud)

    40 partsCERN-OHL-S-2.0
  • 4 layers99.5 × 76.7 mmROCKET, the printed circuit board in 3D

    ROCKET

    Pingu207/ROCKET

    Designing and building a TVC rocket controlled by a custom PCB wired to a ESP32-WROOM board

    113 parts
  • 4 layers82.5 × 45 mmEumesmo poe-2rl v1, the printed circuit board in 3D

    Eumesmo poe-2rl v1

    thermseekr/eumesmo-poe-2rl

    PoE-powered ESP32 controller featuring 2x onboard SPST NO relays. Ideal for access control, doors, or isolated zones.

    109 parts
  • 2 layers65 × 88 mmRC CAR V2, the printed circuit board in 3D

    RC CAR V2

    yamahdee/KICAD-RC-CAR

    104 parts
  • 4 layers126.1 × 43.6 mmLaunch clock pcb v3 demo, the printed circuit board in 3D

    Launch clock pcb v3 demo

    crnkovicaaron/launchclock

    Key components: - MCU: ATmega328P - RTC: DS3231M with CR1220 battery backup - Displays: MAX7219-driven dual 4-digit 7-segment (5641AS) and 8x8 dot matrix (1088AS) - Input: 4x4 matrix keypad - Power: 5V DC via 5.5x2.1mm…

    48 parts
  • 2 layers83.2 × 40 mmSmartdisplay, the printed circuit board in 3D

    Smartdisplay

    BearLaboratory/smartdisplay-hardware

    2.9寸墨水屏个人显示终端硬件显示

    46 parts175GPL-3.0
  • 2 layers80 × 50 mmThermal Camera, the printed circuit board in 3D

    Thermal Camera

    Circuit-Digest/MLX90640-Thermal-Camera

    An Open Source Thermal Imaging IR camera that you can build yourserlf

    66 parts94

Questions

How big is the Arduino uno dev PCB?

It measures 55 × 67 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Arduino uno dev use?

36 parts, built around the ATMEGA328-PU, CH340K and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Arduino uno dev KiCad files?

From the rithylim/arduino-uno-dev-pcb repository on GitHub, at the commit this page was made from: the board is arduino_uno_dev.kicad_pcb and its schematic arduino_uno_dev.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Arduino uno dev design in my own project?

Its repository states no licence, so its author keeps all rights: ask rithylim before reusing the design.