4 layers142 × 90 mm
2 layers58 × 74.4 mm
Labo1 tpFinal
RitaMos/Labo-1- Size
- 58 × 74.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 24
- Pads
- 115
- Tracks, vias
- 190, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 20 Mar 2026
- Updated
- 17 Jul 2026
Overview
Labo1 tpFinal is an open-source printed circuit board by RitaMos, from the RitaMos/Labo-1 repository on GitHub. It is a 2-layer board of 58 × 74.4 mm with 56 parts on 24 nets, routed with 190 tracks and 4 vias.
It is built around the MMP200JR-100R, T491E107K020AT and RMCF0805FT10K0, with the TLCR106M020RTA, RNCP0805FTD180R and TACR105M025XTA among its other parts. Its parts include 12 diodes, 7 resistors, 5 capacitors and 1 connector.
Main components
9
MMP200JR-100R
MELF-0309-55℃~+155℃ 100Ω 2W Metal Film Resistor ±5% MELF-0309 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountT491E107K020AT
2824-55℃~+125℃ 100uF 20V 500mΩ ±10% 2824 Tantalum Capacitors ROHSKEMETTantalum Capacitors
RMCF0805FT10K0
0805-55℃~+155℃ 10kΩ 125mW 150V Thick Film Resistor ±1% ±100ppm/℃ 0805 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface Mount
TLCR106M020RTA
0805Tantalum CapacitorsKyocera AVXRNCP0805FTD180R
0805-55℃~+155℃ 180Ω 200V 250mW Thin Film Resistor ±1% ±100ppm/℃ 0805 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface Mount
TACR105M025XTA
CASE-R-2012-15(mm)-55℃~+125℃ 1uF 25V 5Ω@100kHz ±20% CASE-R-2012-15(mm) Tantalum Capacitors ROHSKyocera AVXTantalum Capacitors
F750G228KRC
2824-55℃~+125℃ 2200uF 4V 70mΩ ±10% 2824 Tantalum Capacitors ROHSKyocera AVXTantalum Capacitors
3296W-1-202LF
插件-3P,9.5x4.9mm28 2kΩ 500mW ±10% ±150ppm/℃ Plugin-3P,9.5x4.9mm Potentiometers, Variable Resistors ROHSjieerruiPotentiometers & Variable Resistors
LM317
SOT-223-40℃~+85℃@(Ta) 0.003%Vout 1 1.3V~37V 1A 40V 80dB@(120Hz) Adjustable Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | D1N4007 | componentes_externos:P1_DO-41 | D7, D8, D9, D10, Dout1, Dout2 |
| 5 | 100nf | componentes_externos:CAPC2012X140N | C6, CIn3, CIn4, Cout1, Cout2 |
| 4 | Conn_01x01_Pin | componentes_externos:H212201 | TOR1, TOR2, TOR3, TOR4 |
| 4 | D1N5404 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D16, D17, D18, D19 |
| 2 | 100 2W | componentes_externos:RES_MMP200_YAG-M | R1, R2 |
| 2 | 100k | componentes_externos:RESC2012X60N | Rout1, Rout2 |
| 2 | 100uf | componentes_externos:CAPMP7.6X6_3.8N_KEM | Cout3, Cout4 |
| 2 | 10k | componentes_externos:STA_RMCF0805_STP | R6, R7 |
| 2 | 10uf | componentes_externos:CAPC2012X140N | CDes1, CDes2 |
| 2 | 180 | componentes_externos:RESC2012X60N | R3, R4 |
| 2 | 1uf | componentes_externos:TACR_AVX | CF-1, CF+1 |
| 2 | 2200uf | Capacitor_Tantalum_SMD:CP_EIA-7260-15_AVX-R | CIn1, CIn2 |
| 2 | D02CZ20 | componentes_externos:SC-59_TOS | D14, D15 |
| 2 | FUSEHOLDER | componentes_externos:FUSE_01110501Z | FH_VCC-1, FH_VCC+1 |
| 2 | R_Potentiometer | componentes_externos:POT_3296W | RV1, RV2 |
| 1 | 5.1k | componentes_externos:RESC2012X60N | R5 |
| 1 | CONN PWR 3-H | componentes_externos:CONN_A-6373-03A_MOL | CONOUT_VCC1 |
| 1 | Conn_01x03 | componentes_externos:CONN_A-6373-03A_MOL | CONIN_VAC2 |
| 1 | Conn_01x03_Pin | componentes_externos:WURTH_61300311121 | J1 |
| 1 | LM317_TO220 | componentes_externos:TO254P467X1016X1971-3P | Reg+1 |
| 1 | LM337_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | Reg-1 |
| 1 | OPAMP Adj | componentes_externos:N_8_ADI | AD741 |
| 1 | VADJ VCC+ | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TEST_POINT5 |
| 1 | VADJ_VCC- | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TEST_POINT3 |
| 1 | VIN_VCC+ | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TEST_POINT2 |
| 1 | VIN_VCC- | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TEST_POINT4 |
| 1 | VOUT VCC+ | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TEST_POINT1 |
| 1 | VOUT VCC+1 | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TEST_POINT7 |
| 1 | VOUT VCC-1 | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TEST_POINT8 |
| 1 | VOUT_VCC- | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TEST_POINT6 |
Questions
How big is the Labo1 tpFinal PCB?
It measures 58 × 74.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Labo1 tpFinal use?
56 parts, built around the MMP200JR-100R, T491E107K020AT, RMCF0805FT10K0 and TLCR106M020RTA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Labo1 tpFinal KiCad files?
From the RitaMos/Labo-1 repository on GitHub, at the commit this page was made from: the board is TP_Final/labo1_tpFinal/labo1_tpFinal.kicad_pcb and its schematic TP_Final/labo1_tpFinal/labo1_tpFinal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Labo1 tpFinal design in my own project?
Its repository states no licence, so its author keeps all rights: ask RitaMos before reusing the design.
Similar boards
- 2 layers120.5 × 53.3 mm
- 2 layers97.5 × 79 mm
RGB LED Driver
PCB-Design-MIT/Wi-Fi-Controlled-RGB-Light
A demo board for students to learn to solder and debug
144 parts4 - 2 layers50.8 × 81.3 mm
Burrboard
drogue-iot/burrboard
This repository contains prototyping boards for RH summit, aka burrboards, firmware running on the burrboard feathers, and the software around it
34 parts3Apache-2.0 - 2 layers50.8 × 20.3 mm
ATF150x uDEV
bkw777/ATF150x_uDEV
Tiny dev board for ATF1502AS(V)(L)-xAx44 and ATF1504AS(V)(L)-xAx44
14 parts1 - 2 layers80 × 100 mm
- 2 layers67.1 × 116.2 mm
- 2 layers74.1 × 16.6 mm
