
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

8P8C adapter for the CANdapter with selectable termination
Doohickey is an open-source printed circuit board by risingtideresearch, from the risingtideresearch/CANdapter_Doohickey repository on GitHub, published under the MIT licence. It is a 2-layer board of 42 × 40 mm with 12 parts on 22 nets, routed with 74 tracks and 6 vias.
Its parts include 4 connectors, 2 resistors and 1 capacitor.
Plug the doohickey into the CANdapter = Get 8P8C x2 + Selectable 120Ohm Termination

| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 60.4R | RisingTideResearch-Resistor:R_0402_1005Metric | R7, R8 |
| 2 | 8P8C | RisingTideResearch-Connector:RJ45_Amphenol_RJHSE5380 | J1, J5 |
| 1 | 4.7nF | RisingTideResearch-Capacitor:C_0402_1005Metric | C2 |
| 1 | Conn_02x02_Pin | RisingTideResearch-Connector:PinHeader_2x02_P2.54mm_Vertical_SMD | J8 |
| 1 | DE9 Socket | RisingTideResearch-Connector:DSUB-9_Pins_Right-Angle | J6 |
| 1 | G*** | kibuzzard-6AA231C7 | kibuzzard-6AA231C7 |
| 1 | G*** | kibuzzard-6AA23186 | kibuzzard-6AA23186 |
| 1 | LOGO | RisingTideResearch-Aesthetic:Logo_4mm_Half | G*** |
| 1 | LOGO | LOGO | G*** |
The 11 most common of 12 parts.

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 42 × 40 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the risingtideresearch/CANdapter_Doohickey repository on GitHub, at the commit this page was made from: the board is hardware/Doohickey/Doohickey.kicad_pcb and its schematic hardware/Doohickey/Doohickey.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).