2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0
2 layers72 × 54.8 mm
Daylight
RishitJain-dev/DaylightAn alarm clock with a TFT 2.25 inch screen and dial to act as not just a alarm clock, but also as a timer, stopwatch and pomodoro focus timer
- Size
- 72 × 54.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 17
- Pads
- 63
- Tracks, vias
- 105, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 31 Aug 2026
- Updated
- 11 Sep 2026
Overview
Daylight is an open-source printed circuit board by RishitJain-dev, from the RishitJain-dev/Daylight repository on GitHub. It is a 2-layer board of 72 × 54.8 mm with 14 parts on 17 nets, routed with 105 tracks and 1 via.
Its parts include 3 switches, 2 diodes, 1 IC and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.
README
README.mdDaylight
An alarm clock with a TFT 2.25 inch screen and dial to act as not just a alarm clock, but also as a timer, stopwatch and pomodoro focus timer
1. Designing the schematic - 1 hour
I used KiCad to design the schematic, loosely following the guide on Blare.
https://lapse.hackclub.com/timelapse/PNQWRp-xT5TE
2. Designing the PCB - 1 hour 30 minutes
Placed components, routed traces, filled a ground pour and exported STEP and GERBER for later use
https://lapse.hackclub.com/timelapse/aowiD0g3GfD9
3. Designing the CAD - 1 hour 30 minutes
I used Onshape to design the CAD, splitting the casing into 2 pieces, top and bottom, all connected by nuts and bolts, and keycaps for the switches and a knob for the rotary encoder, and a small hole for the USB-C port
Bill of Materials
2x Cherry MX Switches
2x Keycaps any colour
1x EC11 Rotary Encoder with switch
1x Seeed XIAO RP2040
4x M3 Nut and Bolt, 2cm, Low profile top
4x M3 Spacers, 3mm diameter, 0.6cm, circular, non-threaded
1 Case (2 printed parts)
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | Buzzer_5V | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | RotaryEncoder | Rotary_Encoder:RotaryEncoder_Alps_EC11E_Vertical_H20mm_CircularMountingHoles | SW3 |
| 1 | XIAO-ESP32-C3-SMD | Seeed_Studio_XIAO_Series:XIAO-ESP32-C3-DIP | U1 |
Questions
How big is the Daylight PCB?
It measures 72 × 54.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Daylight use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Daylight KiCad files?
From the RishitJain-dev/Daylight repository on GitHub, at the commit this page was made from: the board is PCB/Daylight.kicad_pcb and its schematic PCB/Daylight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Daylight design in my own project?
Its repository states no licence, so its author keeps all rights: ask RishitJain-dev before reusing the design.
Similar boards
- 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
