2 layers152 × 85 mm
2 layers65 × 30 mm
Debugger2
rishabh110493/14-6421Work Done in Embedded Systems as a part of course
- Size
- 65 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 62
- Pads
- 310
- Tracks, vias
- 601, 87
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 Jun 2017
- Updated
- 19 Jun 2017
Overview
Debugger2 is an open-source printed circuit board by rishabh110493, from the rishabh110493/14-642 repository on GitHub. It is a 2-layer board of 65 × 30 mm with 65 parts on 62 nets, routed with 601 tracks and 87 vias.
It is built around the 93LC56B, FT2232HL and PRTR5V0U2X. Its parts include 21 capacitors, 19 resistors, 6 ICs, 5 diodes and 4 connectors.
Main components
3
93LC56B
SOT-23-6SOT-23-6 New Arrivals ROHSMicrochip TechnologyUncategorised
FT2232HL
QFP64Dual High Speed USB to Multipurpose UART/FIFO ICFTDIUncategorised
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.md14-642
Work Done in Embedded Systems as a part of course
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitors_SMD:C_0603 | C1, C2, C3, C4, C6, C7, C9, C12, C13, C16, C18 |
| 5 | 10k | Resistors_SMD:R_0603 | R1, R6, R8, R13, R19 |
| 5 | 4.7u | Capacitors_SMD:C_1206 | C5, C8, C11, C14, C15 |
| 4 | hole-grounded-no4 | debugger2-special:hole-no4 | H1, H2, H3, H4 |
| 3 | 220 | Resistors_SMD:R_0603 | R9, R10, R15 |
| 2 | 10 | Resistors_SMD:R_0603 | R11, R12 |
| 2 | 18pF | Capacitors_SMD:C_0603 | C17, C19 |
| 2 | 1uF | Capacitors_SMD:C_0603 | C20, C21 |
| 2 | 600R/0.5A | Resistors_SMD:R_0805 | FB1, FB2 |
| 2 | D_Small | Diodes_SMD:SOD-523 | D4, D5 |
| 2 | dnp-3.9k | Resistors_SMD:R_0603 | R17, R18 |
| 1 | 0.05 | Resistors_SMD:R_1206 | R7 |
| 1 | 12MHz | debugger2-special:Crystal_Grounded_3.2x2.5 | Y1 |
| 1 | 20k | Resistors_SMD:R_0603 | R3 |
| 1 | 2k | Resistors_SMD:R_0603 | R2 |
| 1 | 33k | Resistors_SMD:R_0603 | R4 |
| 1 | 47k | Resistors_SMD:R_0603 | R14 |
| 1 | 93LC56B | Housings_SSOP:TSSOP-8_4.4x3mm_Pitch0.65mm | U1 |
| 1 | AP7365_SOT-23-5 | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P1 |
| 1 | DMMT3906_Dual_PNP | TO_SOT_Packages_SMD:SOT-23-6 | Q2 |
| 1 | FT2232H | Housings_QFP:TQFP-64_10x10mm_Pitch0.5mm | U3 |
| 1 | MIC9409x_SC-70 | TO_SOT_Packages_SMD:SC-70-6 | U2 |
| 1 | PRTR5V0U2X | debugger2-special:SOT-143_NXP | U5 |
| 1 | PWRLED | LEDs:LED-0603 | D3 |
| 1 | Q_PMOS_GSD | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | RXLED | LEDs:LED-0603 | D1 |
| 1 | SW_PUSH | Buttons_Switches_SMD:SW_SPST_EVPBF | SW1 |
| 1 | TXLED | LEDs:LED-0603 | D2 |
| 1 | USB_OTG | debugger2-special:USB_Micro-B_SMT | P3 |
| 1 | dnp-0 | Resistors_SMD:R_0603 | R5 |
| 1 | dnp-100n | Capacitors_SMD:C_0603 | C22 |
| 1 | dnp-1k | Resistors_SMD:R_0603 | R16 |
| 1 | dnp-AT24CS32-SSHM | Housings_SSOP:TSSOP-8_4.4x3mm_Pitch0.65mm | U6 |
| 1 | dnp-CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P5 |
| 1 | dnp-REF-182665-01 | debugger2-special:Pin_Header_Straight_TH-SMT-NoPaste_2x20 | P4 |
Questions
How big is the Debugger2 PCB?
It measures 65 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Debugger2 use?
65 parts, built around the 93LC56B, FT2232HL and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Debugger2 KiCad files?
From the rishabh110493/14-642 repository on GitHub, at the commit this page was made from: the board is pcb/debugger/v2/debugger2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Debugger2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask rishabh110493 before reusing the design.
More from rishabh110493/14-642
1Similar boards
- 4 layers44 × 64 mm
JTAGProgrammer
anthony-bernaert/ftdi-jtag-programmer
FTDI-based JTAG Programmer Circuit for FPGAs
122 parts77CERN-OHL-P-2.0 - 2 layers68.6 × 53.3 mm
Gowinduino
SushiBits/Gowinduino
Arduino-compatible evaluation board with Gowin GW1NSR-4C FPGA
86 parts8 - 4 layers140 × 140 mm
- 4 layers65 × 56.5 mm
Tangnano9k kr260-hat
calperxd/tangnano9k-kr260-hat
FPGA HAT for the AMD Kria KR260 based on the Tang Nano 9K (Gowin GW1NR-9, FT2232H, 16-bit parallel link on J21): KiCad 10 schematic, 4-layer PCB and JLCPCB production files
181 parts1 - 2 layers65 × 56 mm
- 4 layers115 × 85 mm
- 2 layers51 × 20 mm
Jtag to usb
zeodotdev/zeo-boards
ESP32-S3 development board with onboard BME280 (temperature, humidity, pressure) and LSM6DS3 (6-axis IMU) sensors. This repo contains the designs, ESP-IDF firmware, and a Python plotter for visualization.
27 parts3 - 2 layers70 × 79 mm
