Skip to the content
2 layers17 × 20 mmFeeder, the printed circuit board in 3D

Arduino Mega shield for controlling part feeders for Open PNP

Size
17 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
5
Pads
16
Tracks, vias
14, 1
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
19 May 2022
Updated
1 Feb 2025

Overview

Feeder is an open-source printed circuit board by RinthLabs, from the RinthLabs/MaxFeeder repository on GitHub, published under the MIT licence. It is a 2-layer board of 17 × 20 mm with 5 parts on 5 nets, routed with 14 tracks and 1 via.

Its parts include 2 diodes, 2 connectors and 1 switch.

README

README.md

Max Feeder

Part Feeding Simplified

Designed to automate feeding parts for your Open PnP compatible pick and place machine


Max Feeders of multiple widths

This feeder is designed to be set up as an AutoFeeder in OpenPNP. It easily clips to 2020 aluminum extrusion and uses an Arduino Mega to receive Gcode commands sent over a USB serial connection in Open PnP. The Max Feeder Shield can control up to 34 feeders.

The design of the Max Feeder is based on the 0816 feeder design from mgrl. However after two years of development I redesigned every piece of it to improve and simplify the feeder as much as possible.

During development, I also referenced the remix of the 0816 feeder made Nicmoly for the Lumen PNP.


Where can I get a Max Feeder?

I am selling kits of the Max Feeder Shield and kits of 5x 8mm Max Feeders.

The online store is now live! Thanks for supporting this open hardware project!

This is an Open Hardware project, so all of the design files and the BOM are included in this repo as well.

If you like what I'm doing consider becoming a Github Sponsor :gift_heart:


Hardware

Max Feeder Shield

Max Feeder Shield

  • 1 - Max Feeder Shield PCB
  • 34 - 4 Pin 2.54mm JST connectors
  • 1 - Arduino Mega
  • 1 - 10uf Capacitor
  • 1 - Barrel Jack
  • 1 - 3.81mm Screw Terminal - Optional
  • 1 - 6mm Through Hole Tacticle Switch
  • 1 - 5v DC 3A (or more) Power Supply
  • LOTS of 2.54mm Male Header
  • Mounting Bracket in the "3D" folder

Max Feeder 8mm

Max Feeder


3D Prints

Max Feeder Parts

Max Feeder

Included are two 3MF files which has all the parts oriented and ready to print. Also there are the individual STL files if your slicer doesn't support 3MF files.

The files that need to be printed with a 0.4mm nozzle are labeled, all the other parts can be printed with 0.4mm, 0.6mm, or 0.8mm nozzles. Everything is designed to be printed without supports. If you print with a 0.8mm nozzle you can print a whole feeder in less than 1.5 hours.

Download the 8mm Max Feeder. 12mm, 16mm, and 24mm versions are available in beta status. All of the feeder widths use the same hardware. The only difference between them are the 3D print files.

Multiple Mounting Options

FeederBase.stl and FeederCover.stl are designed to clip onto 2020 aluminum extrusion. This is the default configuration of the Max Feeder and it's designed to mount to the Lumen PnP.

DIN-FeederBase.stl and DIN-FeederCover.stl are designed to clip onto DIN Rail for pick and place machines with a flat mounting surface, like the LitePlacer.

2040-FeederBase.stl and 2040-FeederCover.stl are designed to clip onto 2040 aluminum extrusion. So it will mount to any pick and place machines that the original 0816 feeder can mount to.


Max Feeder

Max Feeder Shield

Included is a bracket to bolt a Max Feeder Shield + Arduino Mega compatible microcontroller to the side of some 2020 aluminum extrusion. The current bracket was designed to be used with a Lumen PNP but might work for other pick and place machines too.

Download it here


Feeder Assembly & Configuration


Max Feeder

Reel Holder

Reel holder

Download and print this reel holder for your spools of parts

Troubleshooting

If you are still having problems after going through the "Feeder Assembly & Configuration" here are some solutions to common problems

Notes

There are a few optional parts for the feeder you can print.

QR Code Cap

This part is attached to the front of your feeder and is designed to have a 1/2" x 1/2" QR code stuck onto it. Atanisoft and I have been working on FeederUtils, which features a way to import and automatically set up part feeders in Open PnP. The QR code portion of the project is still under development.

Check it out here

Parts

5
QtyValueFootprintReferences
11N4001Diode_THT:D_A-405_P7.62mm_HorizontalD2
11N4001Diode_SMD:D_SMA-SMB_Universal_HandsolderingD1
1Conn_01x04PinsClean:PinSocket_1x04_P2.54mm_Vertical_CleanJ4
1Conn_01x05PinsClean:PinSocket_1x05_P2.54mm_Vertical_Clean_LockingJ1
1SW_SPDTMicroswitch:MicroswitchSW1

More from RinthLabs/MaxFeeder

2
  • 2 layers85 × 100 mmFeeder Panelized, the printed circuit board in 3D

    Feeder Panelized

    RinthLabs/MaxFeeder

    Arduino Mega shield for controlling part feeders for Open PNP

    125 parts36MIT
  • 2 layers101.5 × 54.5 mmMAXFeederShield, the printed circuit board in 3D

    MAXFeederShield

    RinthLabs/MaxFeeder

    Arduino Mega shield for controlling part feeders for Open PNP

    41 parts36MIT

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the Feeder PCB?

It measures 17 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Feeder use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Feeder KiCad files?

From the RinthLabs/MaxFeeder repository on GitHub, at the commit this page was made from: the board is PCB/MaxFeeder/Feeder.kicad_pcb and its schematic PCB/MaxFeeder/Feeder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Feeder design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).