2 layers121.5 × 136.5 mm
2 layers408.5 × 194.8 mm
Neolexis
rhettjay/keeb1custom ergonomic keyboards
- Size
- 408.5 × 194.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 155
- Nets
- 57
- Pads
- 1,170
- Tracks, vias
- 563, 7
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Aug 2024
- Updated
- 3 Oct 2024
Overview
Neolexis is an open-source printed circuit board by rhettjay, from the rhettjay/keeb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 408.5 × 194.8 mm with 155 parts on 57 nets, routed with 563 tracks and 7 vias.
Its parts include 69 switches, 67 diodes, 2 resistors and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) and nRF52 and nRF5x boards of this library.
README
README.mdParts
155| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | ComboDiode | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +18 | |
| 34 | PG1350 | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +18 | |
| 33 | D | Keebio-Parts:Diode-dual | D0, D1, D2, D10, D11, D12, D13, D14, D15, D16, D20, D21, D22, D23, D24, D25 +17 |
| 28 | KEYSW | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.00u | K1, K2, K3, K11, K12, K13, K14, K15, K21, K22, K23, K24, K25, K26, K31, K32 +12 |
| 5 | VAL** | keyboard_parts:HOLE_M3 | HOLE_M3, HOLE_M3, HOLE_M3, HOLE_M3, HOLE_M3 |
| 4 | KEYSW | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.25u | K0, K10, K20, K30 |
| 3 | KEYSW | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.25u_90deg | K36, K46, K46 |
| 2 | 4.7k | Keebio-Parts:Resistor-Compact | R1, R2 |
| 1 | JST_PH_S2B-PH-K_02x2.00mm_Angled | JST1 | |
| 1 | E73:SPDT_C128955 | T1 | |
| 1 | Audio-Jack-4 | Keebio-Parts:TRRS-PJ-320A-dual | TRRS1 |
| 1 | Conn_01x03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | RGB_STRIP1 |
| 1 | Panasonic_EVQPUL_EVQPUC | Panasonic_EVQPUL_EVQPUC | B1 |
| 1 | ProMicro | Keebio-Parts:ArduinoProMicro | U1 |
| 1 | SW_PUSH | Buttons_Switches_ThroughHole:SW_PUSH_6mm_h4.3mm | RST_SW1 |
| 1 | nice_nano | nice_nano | MCU1 |
The 151 most common of 155 parts.
Questions
How big is the Neolexis PCB?
It measures 408.5 × 194.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Neolexis use?
155 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Neolexis KiCad files?
From the rhettjay/keeb repository on GitHub, at the commit this page was made from: the board is neolexis/pcb/neolexis.kicad_pcb and its schematic neolexis.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Neolexis design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers305.9 × 135.1 mm
- 2 layers285 × 94.6 mm
- 2 layers254 × 134.6 mm
FPGA Z80 (no traces)
douggilliland/Retro-Computers
Retro-Computer Designs (Z80, 65C816, etc)
155 parts87 - 2 layers334.6 × 122.8 mm
ProductionPCB
compressionKeyboards/compression4c
This repo contains the files to order a custom PCB for (4c), checkout the zmk layout to build firmware!
155 parts60 - 2 layers285.4 × 94.9 mm
Rosaline ortho
peej/rosaline-keyboard
40% staggered through-hole component keyboard PCB for standard 60% cases
155 parts53MIT - 2 layers60.3 × 128.3 mm
- 2 layers209.6 × 154.9 mm
