
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

Apple II Card Slot Riser
Apple2-slot riser is an open-source printed circuit board by rharke, from the rharke/apple2-slot-riser repository on GitHub. It is a 2-layer board of 89.9 × 50.8 mm with 6 parts on 60 nets, routed with 381 tracks and 0 vias.
Its parts include 4 connectors, 1 resistor and 1 diode. It belongs with the retro computing and games boards of this library.

This is a simple KiCad project to build an Apple II card slot riser.
It contains mounting points for straddle-mounting an edge connector, or using a right-angle connector.
It also contains a spot to mount a 50 pin header for connection to a logic analyzer or something else like a slot extender.
Only the +5V power line is connected; +12, -12, and -5 are unconnected for safety. But adding them back would be trivial if you need them.
Copyright 2020 Renee Harke
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | CARD EDGE | footprint:AppleIIBus | J1 |
| 1 | EXTENDER / LOGIC ANALYZER | footprint:IDC-Header_2x25_P2.54mm_Vertical_CCW | J4 |
| 1 | POWER | LED_THT:LED_D5.0mm | D1 |
| 1 | RIGHT ANGLE | footprint:CardEdge_EDEC_3x5-050_2x25_P2.54mm_CCW | J3 |
| 1 | STRADDLE MOUNT | footprint:AppleIIBus_TightMask | J2 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

It measures 89.9 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rharke/apple2-slot-riser repository on GitHub, at the commit this page was made from: the board is apple2-slot-riser.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rharke before reusing the design.