Skip to the content
2 layers89.9 × 50.8 mmApple2-slot riser, the printed circuit board in 3D

Apple II Card Slot Riser

Size
89.9 × 50.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
60
Pads
204
Tracks, vias
381, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
18 Aug 2020
Updated
18 Aug 2020

Overview

Apple2-slot riser is an open-source printed circuit board by rharke, from the rharke/apple2-slot-riser repository on GitHub. It is a 2-layer board of 89.9 × 50.8 mm with 6 parts on 60 nets, routed with 381 tracks and 0 vias.

Its parts include 4 connectors, 1 resistor and 1 diode. It belongs with the retro computing and games boards of this library.

README

README.md

Apple II Card Slot Riser

Board preview

This is a simple KiCad project to build an Apple II card slot riser.

It contains mounting points for straddle-mounting an edge connector, or using a right-angle connector.

It also contains a spot to mount a 50 pin header for connection to a logic analyzer or something else like a slot extender.

Only the +5V power line is connected; +12, -12, and -5 are unconnected for safety. But adding them back would be trivial if you need them.

License

Copyright 2020 Renee Harke

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Parts

6
QtyValueFootprintReferences
1330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1CARD EDGEfootprint:AppleIIBusJ1
1EXTENDER / LOGIC ANALYZERfootprint:IDC-Header_2x25_P2.54mm_Vertical_CCWJ4
1POWERLED_THT:LED_D5.0mmD1
1RIGHT ANGLEfootprint:CardEdge_EDEC_3x5-050_2x25_P2.54mm_CCWJ3
1STRADDLE MOUNTfootprint:AppleIIBus_TightMaskJ2

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the Apple2-slot riser PCB?

It measures 89.9 × 50.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Apple2-slot riser use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Apple2-slot riser KiCad files?

From the rharke/apple2-slot-riser repository on GitHub, at the commit this page was made from: the board is apple2-slot-riser.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Apple2-slot riser design in my own project?

Its repository states no licence, so its author keeps all rights: ask rharke before reusing the design.