Skip to the content
2 layers35.3 × 51.1 mmMyocell2, the printed circuit board in 3D

EMG platform

Size
35.3 × 51.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
103
Pads
190
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 7 (file 20221018)
Created
22 Jun 2018
Updated
21 Oct 2026

Overview

Myocell2 is an open-source printed circuit board by RF-Lab, from the RF-Lab/emg_platform repository on GitHub. It is a 2-layer board of 35.3 × 51.1 mm with 29 parts on 103 nets.

It is built around the ESP32-WROOM-32, OPA340NA and AP2112K-3.3. Its parts include 17 capacitors, 6 ICs, 4 resistors and 2 connectors. It belongs with the ESP32 boards of this library.

Main components

3

README

hw_platform/MYOPROBE/readme.md

Single channel myoelectric analogue pre-conditioning board

KiCad

Single channel analog pre-amplifier board with built-in EMG electrodes for multiboard MYOCELL design. Includes INA331. Rev 1.0 available. Rev 2.0 for MYOCELL8 in progress.

Parts

29
QtyValueFootprintReferences
50.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C8, C10, C14, C16
41uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC11, C13, C34, C35
310uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC7, C9, C15
22.2uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC38, C39
24.7nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C6
2AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U9, U10
2Conn_01x16Connector_FFC-FPC:Hirose_FH12-16S-0.5SH_1x16-1MP_P0.50mm_HorizontalJ1, J2
2OPA340NAPackage_TO_SOT_SMD:SOT-23-5U2, U4
11.5nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC12
110kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4
11MOmResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
15.1kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
15.6kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5
1ADS1292Package_QFP:PQFP-32_5x5mm_P0.5mmU3
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U1

More from RF-Lab/emg_platform

3
  • 2 layers96 × 100 mmADS1299EMG8xR2, the printed circuit board in 3D

    ADS1299EMG8xR2

    RF-Lab/emg_platform

    EMG platform

    152 parts9
  • 4 layers53.5 × 74.7 mmMYOCELL8, the printed circuit board in 3D

    MYOCELL8

    RF-Lab/emg_platform

    EMG platform

    102 parts9
  • 2 layers15 × 34.3 mmMyoprobe, the printed circuit board in 3D

    Myoprobe

    RF-Lab/emg_platform

    EMG platform

    22 parts9

Similar boards

  • 2 layers28 × 30 mmOtterIron Devkit, the printed circuit board in 3D

    OtterIron Devkit

    Jana-Marie/Otter-Iron-PRO

    USB-PD soldering station for JBC C245 handles.

    64 parts321
  • 4 layers150 × 50 mmQI Charger, the printed circuit board in 3D

    QI Charger

    drewsum/QI_Charger

    A DIY QI Wireless Phone Charger

    322 parts20
  • 4 layers214 × 142.6 mmUnmechanical sweepish, the printed circuit board in 3D

    Unmechanical sweepish

    ebastler/UnMechanical

    Capacitive touch keyboard running QMK firmware

    168 parts13CERN-OHL-P-2.0
  • 4 layers74.4 × 50.2 mmRoadster charger, the printed circuit board in 3D

    Roadster charger

    zainahm3d/roadster-charger

    USB-C PD bike charger

    109 parts7
  • 4 layers80 × 30 mmLogic board, the printed circuit board in 3D

    Logic board

    jbush001/HeadphoneGuitarPracticeAmp

    Portable headphone amplifier/effects processor for electric guitar practice.

    55 parts4Apache-2.0
  • 2 layers49 × 34 mmOPS, the printed circuit board in 3D

    OPS

    Jana-Marie/OPS

    OPS - The Otter Power Supply

    99 parts3
  • 4 layers20.3 × 68.6 mmCarrier, the printed circuit board in 3D

    Carrier

    PyFive-RISC-V/pyfive-mpw1-pcb

    Breakout carrier for the MPW1 PyFive chip

    68 parts3MIT

Questions

How big is the Myocell2 PCB?

It measures 35.3 × 51.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Myocell2 use?

29 parts, built around the ESP32-WROOM-32, OPA340NA and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Myocell2 KiCad files?

From the RF-Lab/emg_platform repository on GitHub, at the commit this page was made from: the board is hw_platform/MYOCELL2/myocell2.kicad_pcb and its schematic hw_platform/ADS1292EMG2x/ADS1292EMG2x.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Myocell2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask RF-Lab before reusing the design.