
MotorDrive Control AURIX
rezasede/AURIX_MotorControl_TB_HW
Hardware of GaN FET Driver TestBench

Hardware of GaN FET Driver TestBench
MotorDrive Power is an open-source printed circuit board by rezasede, from the rezasede/AURIX_MotorControl_TB_HW repository on GitHub. It is a 6-layer board of 91 × 71 mm with 343 parts on 129 nets, routed with 1,064 tracks and 1,476 vias.
It is built around the 1EDN7116GXTMA1, TMP1075DGKR and LDK220C-R, with the SS34 and SMBJ48A among its other parts. Its parts include 207 capacitors, 61 resistors, 24 transistors, 19 ICs and 17 diodes. It belongs with the robots and motor control boards of this library.
A two-board, 3-phase GaN-based inverter for driving a PMSM / BLDC motor with Field-Oriented Control (FOC). The design takes inspiration from Infineon's CoolGaN™ motor-drive evaluation boards (EVAL-MTR-48V150A-GaN), whose user manuals are kept in this folder for reference.
| Board | KiCad project | Purpose |
|---|---|---|
| Power board | KicadPower/MotorDrive_Power | 3-phase GaN half-bridges, gate drivers, current / voltage / temperature sensing, DC-link capacitors |
| Control board | KicadControlAURIX/MotorDrive_Control_AURIX | Carrier for the Infineon AURIX™ TC4D7 Lite kit (A3G), logic supply, user I/O, 40-pin link to the power board |
flowchart LR
DC[("DC supply<br/>≤ 48 V nominal")] -->|+Vin| PWR
subgraph CTRL["🧠 Control board — AURIX carrier"]
direction TB
JACK["Power jack"] --> BUCK["MIC28515<br/>buck"] --> LDO1["LDK220C<br/>LDO"]
MCU["AURIX TC4D7<br/>Lite kit"]
UI["LEDs · Button · POT<br/>UART · 5-pin connectors"]
UI --- MCU
LDO1 --> MCU
end
subgraph PWR["⚡ Power board — 6-layer"]
direction TB
GD["Gate drivers<br/>6× 1EDN7116G"]
PS["GaN power stage<br/>24× IGB110S101"]
SNS["Sensing<br/>3× TLE4972 + Vph"]
TMP["Temp sensors<br/>3× TMP1075"]
CAP["Bulk caps<br/>DC link"]
GD --> PS --> SNS
CAP --- PS
end
MCU <==>|"40-pin header<br/>(P_HS/P_LS, IP, VP, OCD, TEMP)"| PWR
SNS ==>|"Phase R / S / T"| M(("PMSM<br/>motor"))The root sheet MotorDrive_Power.kicad_sch reuses one sheet per function and instantiates it three times — once per phase.
flowchart TD
ROOT["MotorDrive_Power.kicad_sch<br/>(root: input connectors, TVS SMBJ48A, LED)"]
ROOT --> CON["Connector<br/>Header 20×2 · LDK220C-R"]
ROOT --> BULK["Bulk_Caps<br/>6× 100 µF 50 V · 2× 47 µF 50 V"]
ROOT --> GD1["GateDrive"] & GD2["GateDrive_1"] & GD3["GateDrive_2"]
ROOT --> PS1["PowerStage"] & PS2["PowerStage_1"] & PS3["PowerStage_2"]
ROOT --> SN1["Sensing"] & SN2["Sensing_1"] & SN3["Sensing_2"]
ROOT --> TS1["TempSensor"] & TS2["TempSensor_1"] & TS3["TempSensor_2"]
classDef ph fill:#e8f1ff,stroke:#3b6fd8,color:#000
classDef shared fill:#fff4e0,stroke:#d08a1a,color:#000
class GD1,GD2,GD3,PS1,PS2,PS3,SN1,SN2,SN3,TS1,TS2,TS3 ph
class CON,BULK sharedEach phase is a half-bridge with 4 paralleled GaN HEMTs on the high side and 4 on the low side (8 × IGB110S101 per phase, 24 in total). Each switch group has its own single-channel gate driver.
flowchart LR
MCU_HS["HS_MCU<br/>(PWM)"] --> DRV_HS["1EDN7116G<br/>high-side driver"]
MCU_LS["LS_MCU<br/>(PWM)"] --> DRV_LS["1EDN7116G<br/>low-side driver"]
BOOT["SS34 bootstrap<br/>+ LDK220C LDO<br/>+ 5.6 V Zener clamp"] -.supply.-> DRV_HS
LDO["LDK220C-R LDO<br/>from +10 V"] -.supply.-> DRV_LS
DRV_HS -->|HS gate| HS["High side<br/>4× IGB110S101 ∥"]
DRV_LS -->|LS gate| LS["Low side<br/>4× IGB110S101 ∥"]
VIN(["+Vin"]) --- HS
HS --- SW(("SW node"))
SW --- LS
LS --- GND(["GND"])
SW --> CS["TLE4972-AE35S5<br/>coreless current sensor"]
CS -->|Iph_P / Iph_N| OUT1["to MCU (diff.)"]
CS -->|OCD| OUT2["Over-current flag"]
SW --> VDIV["Divider"] -->|Vph| OUT3["to MCU ADC"]
CS --> PHASE(("Phase<br/>R/S/T"))The PowerStage sheet also carries a note for the alternative part IGB070S10S1.
flowchart TD
VIN["+Vin (DC bus, ≤48 V)"] --> TVS["SMBJ48A TVS"]
VIN --> DCL["DC-link: 6×100 µF + 2×47 µF bulk<br/>+ ceramic decoupling per phase"]
VIN --> HB["3× GaN half-bridges"]
P10["+10 V (from control board)"] --> LDOG["LDK220C(-R) per driver"] --> GDRV["Gate-driver supply"]
P10 --> LDOC["LDK220C-R (Connector sheet)"] --> P33S["+3V3_SNS<br/>current sensors"]
P33["+3V3 (from control board)"] --> TMPS["TMP1075 / logic"]| Signal | Count | Direction (power board) | Description |
|---|---|---|---|
P_HS[1..3] | 3 | in | High-side PWM per phase |
P_LS[1..3] | 3 | in | Low-side PWM per phase |
IP_P[1..3], IP_N[1..3] | 6 | out | Differential phase-current outputs (TLE4972) |
VP[1..3] | 3 | out | Phase-voltage sense |
OCD | 1 | bidir | Wired over-current detect from current sensors |
TEMP{…} | bus | passive | I²C bus to the three TMP1075 sensors (A0–A2 address straps) |
+Vin, +10V, +3V3, GND | — | power | Supply rails |
Dedicated KiCad net classes exist for P_HS, P_LS, IP_P, IP_N, VP (with a 100 Ω tuning profile for the current-sense pairs).
| Function | Part | Qty |
|---|---|---|
| GaN HEMT, 100 V | Infineon IGB110S101 (PG-VSON-4) | 24 |
| Gate driver | Infineon 1EDN7116GXTMA1 | 6 |
| Current sensor | Infineon TLE4972-AE35S5 (coreless, with OCD) | 3 |
| Temperature sensor | TI TMP1075DGKR (I²C) | 3 |
| LDO | ST LDK220C / LDK220C-R | 7 |
| Bootstrap diode | SS34 | 3 per phase |
| Input TVS | SMBJ48A | 1 |
| Bulk capacitors | 100 µF 50 V / 47 µF 50 V | 6 / 2 |
pie showData title Power board — main active devices
"GaN FETs (IGB110S101)" : 24
"Gate drivers (1EDN7116G)" : 6
"LDOs (LDK220C)" : 7
"Current sensors (TLE4972)" : 3
"Temp sensors (TMP1075)" : 3| Parameter | Value |
|---|---|
| Size | 91 × 71 mm |
| Copper layers | 6 (F.Cu, In1–In4, B.Cu) |
| Board thickness | ≈ 1.56 mm |
| Footprints | 343 |
| Vias / track segments / zones | 1476 / 1064 / 35 |
| Default rules | 0.2 mm track, 0.1 mm clearance, 0.6/0.3 mm via |
┌──────────────── 6-layer stack ────────────────┐
│ F.Cu ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ │ GaN FETs, drivers, power copper
│ In1.Cu ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ │
│ In2.Cu ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ │ inner planes / power-loop return
│ In3.Cu ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ │
│ In4.Cu ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ │
│ B.Cu ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ │
└────────────────────── ≈1.56 mm ───────────────┘flowchart TD
ROOT["MotorDrive_Control_AURIX.kicad_sch"] --> PSU["PSU sheet"]
ROOT --> CTL["Control sheet"]
PSU --> J["Power jack"] --> T["SMBJ10A TVS"] --> B["MIC28515T-E/PHA<br/>sync. buck + inductor<br/>220 µF / 47 µF"] --> L["LDK220C-R LDO"]
CTL --> HDR["Header 20×2<br/>→ power board"]
CTL --> KIT["AURIX TC4D7 Lite kit pins<br/>P00 · P03 · P15 · P16 · P20–P23 · P32 · P33<br/>AN0–AN21 · /PORST · /ESR0-1"]
CTL --> IO["4× LED · Button · POT<br/>UART TX/RX · 2× 5-pin conn · 4-pin conn<br/>3-pin SMD jumper"]| Parameter | Value |
|---|---|
| Size | 145.9 × 100 mm |
| Copper layers | 2 |
| Board thickness | ≈ 1.69 mm |
| Footprints | 114 |
| Vias / track segments / zones | 431 / 720 / 7 |
MotorControl_TB_PCB/
├── README.md
├── KicadPower/ # Power board (KiCad)
│ ├── MotorDrive_Power.kicad_pro/.kicad_sch/.kicad_pcb/.kicad_dru
│ ├── PowerStage.kicad_sch # 8× GaN per phase
│ ├── GateDrive.kicad_sch # 2× 1EDN7116G per phase
│ ├── Sensing.kicad_sch # TLE4972 + phase voltage
│ ├── TempSensor.kicad_sch # TMP1075
│ ├── Bulk_Caps.kicad_sch
│ ├── Connector.kicad_sch # 40-pin link to control board
│ ├── MotorDrive_Power.csv # early BOM export
│ └── Lib/ # 1EDN7116GXTMA1 symbol + footprint
├── KicadControlAURIX/ # Control board (KiCad)
│ ├── MotorDrive_Control_AURIX.*
│ ├── PSU.kicad_sch / Control.kicad_sch
│ └── AURIX A3G TC4D7 Lite kit user guide (PDF)
├── Tags/ # Released packages: Power_V1.0.zip, control_V1.0.zip
└── Infineon CoolGaN eval-board user manuals (PDF)timeline
title Development history
2026-04-02 : Initial commit
: Migration to KiCad and fixes
2026-04-03 : New G-series gate driver (1EDN7116G) integrated
2026-04-05 : Control board routed
: V1.0 sent for manufacturing
2026-06-22 : Reference PDFs added
2026-10-24 : Power board rev. after V1.0 (work in progress, uncommitted)stateDiagram-v2
direction LR
[*] --> Schematic
Schematic --> Layout
Layout --> V1_0_Fab: Apr 2026
V1_0_Fab --> Rework: Oct 2026
Rework --> V1_1_Review: next
V1_1_Review --> Bring_up
Bring_up --> FOC_tests
note right of Rework
Current state: power board
being revised in KiCad
end noteTags/Conn_01x03 with 10 Ω / 4.7 kΩSS34 library symbol (3 per phase)RezaLIB library)KicadControlAURIX/)| Qty | Value | Footprint | References |
|---|---|---|---|
| 84 | Cap SMD | RezaLIB:CAPC3216X100N | C1, C10, C12, C100, C101, C102, C106, C107, C108, C112, C113, C114, C118, C119, C120, C124 +68 |
| 54 | Cap SMD | RezaLIB:CAPC3225X220N | C11, C103, C104, C105, C109, C110, C111, C115, C116, C117, C121, C122, C123, C127, C128, C129 +38 |
| 40 | Cap SMD | RezaLIB:CAPC1608X90N | C145, C146, C147, C148, C149, C150, C151, C152, C153, C154, C155, C156, C157, C158, C159, C160 +24 |
| 33 | Res SMD | RezaLIB:RESC1608X55N | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +17 |
| 24 | IGB110S101 | RezaLIB:IFX-PG-VSON-4-3-V | Q1, Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23 +8 |
| 18 | 10uF | Capacitor_SMD:C_0603_1608Metric | C194, C195, C196, C197, C198, C199, C200, C201, C202, C203, C204, C205, C212, C213, C214, C215 +2 |
| 12 | 47K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R44, R45, R46, R47, R48, R49, R50, R51, R52, R53, R54, R55 |
| 9 | 10R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R41, R42, R43, R59, R60, R61, R65, R66, R67 |
| 9 | SS34 | Diode_SMD:D_SMA | D17, D18, D19, D20, D21, D22, D23, D24, D25 |
| 6 | 100µF 50V | Capacitor_SMD:C_Elec_8x10.2 | C187, C188, C189, C190, C191, C192 |
| 6 | 1EDN7116GXTMA1 | 1EDN7116GXTMA1:1EDN7116GXTMA1 | IC2, IC3, IC4, IC5, IC6, IC7 |
| 6 | 5.6V | RezaLIB:DIOMELF3615N | D8, D9, D10, D11, D12, D13 |
| 6 | Ferrite Bead SMD | RezaLIB:RESC2012X70N | FB1, FB2, FB3, FB4, FB5, FB6 |
| 5 | Connector | RezaLIB:Terminal Block 2pin | P4, P5, P7, P8, P9 |
| 4 | LDK220C-R | RezaLIB:SOT_220M-R_STM | U4, U8, U9, U10 |
| 3 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R56, R57, R58 |
| 3 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R62, R63, R64 |
| 3 | Cap SMD | RezaLIB:CAPC2012X135N | C172, C173, C174 |
| 3 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2, J3 |
| 3 | LDK220C | RezaLIB:SOT_220M-R_STM | U5, U6, U7 |
| 3 | TLE4972-AE35S5 | RezaLIB:IFX-PG-VSON-6-V | U1, U2, U3 |
| 3 | TMP1075DGKR | RezaLIB:DGK0008A_N | U17, U18, U19 |
| 2 | 47µF 50V | Capacitor_SMD:C_Elec_6.3x7.7 | C193, C209 |
| 1 | Header 20X2 | RezaLIB:HDR2X20-MD | P6 |
| 1 | LED | RezaLIB:LED0603 | LED1 |
| 1 | Res SMD | RezaLIB:RESC3225X70N | R36 |
| 1 | SMBJ48A | RezaLIB:DO-214AA | D1 |

rezasede/AURIX_MotorControl_TB_HW
Hardware of GaN FET Driver TestBench

dotcypress/ir-smart-led-controller
IR Remote Controller for WS2812(or analog) LED Strip


creapunk/CLN-ClosedLoopNemaDriver
Compact closed-loop stepper motor driver designed for NEMA motors

Tufts-SEDS-Rocketry/TR4-Kindlevan
The code repository for everything related to to the TR4 Kindlevin rocket including code for the flight computer, airbrakes and the rocket tracking antenna.

superfansizhe-beep/tscircuit-stm32f302-board
STM32F302R8T6 考核板 —— 用 tscircuit 以 TypeScript 描述原理图与 PCB,9 页分页、4 层板、含完整交付物

bobby1321/High-Current-5V-Regulator
High Current 5V DC Buck Converter Board
It measures 91 × 71 mm and has 6 copper layers, 1.56 mm thick.
343 parts, built around the 1EDN7116GXTMA1, TMP1075DGKR, LDK220C-R and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rezasede/AURIX_MotorControl_TB_HW repository on GitHub, at the commit this page was made from: the board is KicadPower/MotorDrive_Power.kicad_pcb and its schematic KicadControlAURIX/Control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rezasede before reusing the design.