4 layers70 × 69.8 mm
6 layers50 × 42 mm
Accelerator devkit proto-0-baseboard
retraux-design/accelerator-devkit- Size
- 50 × 42 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 180
- Nets
- 345
- Pads
- 1,237
- Tracks, vias
- 3,521, 455
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 5 (file 20200518)
- Created
- 26 Jun 2020
- Updated
- 28 Jun 2020
Overview
Accelerator devkit proto-0-baseboard is an open-source printed circuit board by retraux-design, from the retraux-design/accelerator-devkit repository on GitHub, published under the Apache-2.0 licence. It is a 6-layer board of 50 × 42 mm with 180 parts on 345 nets, routed with 3,521 tracks and 455 vias.
It is built around the LP3943ISQ, TPD12S016RKTR and W25Q512JVBIQ, with the 93LC56BT-E/MNY, CSD13381F4 and DSC1103DI2-100.0000 among its other parts. Its parts include 84 capacitors, 36 resistors, 15 ICs, 8 connectors and 4 diodes. It belongs with the computers and single-board computers boards and the FPGA and CPLD boards of this library.
Main components
6
LP3943ISQ
WQFN-24-EP(4x4)-40℃~+85℃ 16 2.3V~5.5V 25mA Built-in PWM、I2C WQFN-24-EP(4x4) LED Drivers ROHSTexas InstrumentsLED Drivers
TPD12S016RKTR
UQFN-24(2x4)-40℃~+85℃ 3.4Gbps 4.5V~5.5V I2C UQFN-24(2x4) Interface - Specialized ROHSTexas InstrumentsInterface - Specialized
W25Q512JVBIQ
TFBGA-24(6x8)-40℃~+85℃ 100,000 cycles 133MHz 150ms@(64KB) 2.7V~3.6V 20 Years 3.5ms 512Mbit Power-on reset、Hardware Write Protection、Software Write Protection、Write enable latch、Absolute Write Protection、Power lock protection SPI TFBGA-24(6x8) NOR FLASH ROHSWinbond ElecNOR FLASH
93LC56BT-E/MNY
TDFN-8-40℃~+125℃ 1,000,000 cycles 2.5V~5.5V 200 Years 2Kbit 2MHz 6ms SPI Software write protection function、Power-down/Power-up protection circuit TDFN-8-EP(2x3) EEPROM ROHSMicrochip TechnologyEEPROM
CSD13381F4
PicoStar-3-55℃~+150℃ 1 N-channel 1.1V 1.4nC@4.5V 12V 2.1A 200pF 3.3pF 400mΩ@1.8V 500mW 62pF N-Channel PicoStar-3 MOSFETs ROHSTexas InstrumentsMOSFETs
DSC1103DI2-100.0000
SMD2520-6PSMD2520-6P Programmable Oscillators ROHSMicrochip TechnologyProgrammable Oscillators
Parts
180| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 0.1uF | Capacitor_SMD_RD:C_0201_0603Metric | C12, C14, C16, C18, C20, C22, C26, C28, C30, C48, C49, C50, C52, C53, C54, C55 +14 |
| 16 | 1uF/16V | Capacitor_SMD_RD:C_0402_1005Metric | C1, C2, C3, C9, C10, C23, C24, C31, C32, C42, C43, C44, C82, C85, C86, C87 |
| 15 | 0.1uF | Capacitor_SMD_RD:C_0402_1005Metric | C35, C36, C37, C38, C39, C40, C45, C46, C47, C64, C67, C78, C79, C80, C84 |
| 13 | 0.01uF | Capacitor_SMD_RD:C_0201_0603Metric | C5, C7, C11, C13, C15, C17, C19, C21, C25, C27, C29, C41, C51 |
| 9 | 10K | Resistor_SMD_RD:R_0402_1005Metric | R4, R6, R7, R8, R15, R30, R50, R52, R53 |
| 8 | 5K1 | Resistor_SMD_RD:R_0402_1005Metric | R1, R2, R5, R10, R26, R27, R28, R31 |
| 7 | 10K | Resistor_SMD:R_Array_Concave_4x0402 | R14, R16, R17, R18, R19, R33, R34 |
| 6 | TestPoint_Small | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | 10uF | Capacitor_SMD_RD:C_0402_1005Metric | C58, C63, C81, C83 |
| 4 | 1K/1A | Inductor_SMD:L_0805_2012Metric | FB1, FB2, FB4, FB6 |
| 4 | 1uF | Capacitor_SMD_RD:C_0201_0603Metric | C56, C57, C61, C62 |
| 4 | 500 | Resistor_SMD:R_Array_Concave_4x0402 | R24, R25, R29, R32 |
| 4 | LED_ARGB | LED_SMD_RD:SML-LX0404SIUPGUSB | D1, D2, D3, D4 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 3 | 1K1 | Resistor_SMD_RD:R_0402_1005Metric | R11, R12, R20 |
| 3 | TPD4E05U06 | Package_SON:USON-10_2.5x1.0mm_P0.5mm | U5, U9, U13 |
| 2 | 2K | Resistor_SMD_RD:R_0402_1005Metric | R9, R21 |
| 2 | 47pF | Capacitor_SMD_RD:C_0402_1005Metric | C33, C34 |
| 2 | SYM_Hot_Small | Symbol:OSHW-Logo2_7.3x6mm_Copper | LOGO2, LOGO3 |
| 1 | 100 | Resistor_SMD_RD:R_0402_1005Metric | R13 |
| 1 | 100K | Resistor_SMD_RD:R_0402_1005Metric | R3 |
| 1 | 10µH/460M/1A | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 1M±1% | Resistor_SMD_RD:R_0402_1005Metric | R51 |
| 1 | 93LC56BT-E/MNY | Package_DFN_QFN:WDFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.4mm | U10 |
| 1 | BUTTON1 | Button_Switch_SMD_RD:PTS830GG140SMTRLFS | SW1 |
| 1 | BUTTON2 | Button_Switch_SMD_RD:PTS830GG140SMTRLFS | SW2 |
| 1 | BUTTON3 | Button_Switch_SMD_RD:PTS830GG140SMTRLFS | SW3 |
| 1 | CSD13381F4 | Package_DFN_QFN_RD:Texas_DFN100X60X35-3N | Q1 |
| 1 | DSC1103DI2-100.0000 | Oscillator_RD:Oscillator_SMD_Microchip_VDFN-6Pin_2.5x2.0mm_J7A | X1 |
| 1 | DSC6003HI2A-012 | Oscillator_RD:Oscillator_SMD_Microchip_VFLGA-4Pin_1.6x1.2mm | X2 |
| 1 | Display | Connector_Molex_RD:Molex_FFC-FPC_52745-2033_1x20_P0.5mm_TopContact | J7 |
| 1 | FT2232H-56Q | Package_DFN_QFN:QFN-56-1EP_8x8mm_P0.5mm_EP5.9x5.9mm_ThermalVias | U2 |
| 1 | HDMI | Connector_HDMI_RD:HDMI_Micro-D_Molex_46765-0x01 | J3 |
| 1 | JTAG | Connector_RD:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical_Outlined | J1 |
| 1 | LFE5U-45-caBGA256 | Package_BGA_RD:Lattice_caBGA-256_14x14mm_P0.8mm | U1 |
| 1 | LP3943 | Package_DFN_QFN:Texas_S-PVQFN-N24_EP2.1x2.1mm | U15 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Symbol_6.7x6mm_Copper | LOGO1 |
| 1 | MT41K128M16JT | Package_BGA:BGA-96_9.0x13.0mm_Layout2x3x16_P0.8mm | U11 |
| 1 | NCP114AMX110TCG | Package_DFN_QFN_RD:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm | U8 |
| 1 | NCP114AMX135TCG | Package_DFN_QFN_RD:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm | U7 |
| 1 | NCP114AMX250TCG | Package_DFN_QFN_RD:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm | U6 |
| 1 | NCP167AMX330TBG | Package_DFN_QFN_RD:XDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm | U4 |
| 1 | NHD-0.6-6464G | Display_RD:NHD-0.6-6464G | DISPLAY1 |
| 1 | Pmod 1A | Connector_PinSocket_RD:Pmod_2Stacked_PinSocket_2x06_P2.54mm_Horizontal | J5 |
| 1 | Pmod 1B | Connector_PinSocket_RD:Pmod_2Stacked_PinSocket_2x06_P2.54mm_Horizontal | J6 |
| 1 | Qwiic I2C | Connector_JST_RD:Qwiic_JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J4 |
| 1 | SWITCH | Button_Switch_SMD_RD:CVS-04TB | SW4 |
| 1 | TPD12S016RKTR | Package_DFN_QFN_RD:Texas_UQFN-24_4x2mm_P0.4mm_RKTR | U3 |
| 1 | TPS61046YFFR | Package_BGA_RD:Texas_DSBGA-6_0.8x1.2mm_Layout2x3_P0.4mm | U14 |
| 1 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | USB-C | Connector_USB_RD:CUI_UJ31-CH-3-MSMT-TR-67 | J2 |
| 1 | W25Q512JVBIQ | Package_BGA_RD:Winbond_TFBGA-24-5x5mm_P1.0mm | U12 |
| 1 | microSD-ST11-H | Connector_Card_RD:microSD_HC_JAE_ST11-H_ST11S008V4HR2000 | J8 |
The 174 most common of 180 parts.
Questions
How big is the Accelerator devkit proto-0-baseboard PCB?
It measures 50 × 42 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Accelerator devkit proto-0-baseboard use?
180 parts, built around the LP3943ISQ, TPD12S016RKTR, W25Q512JVBIQ and 93LC56BT-E/MNY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Accelerator devkit proto-0-baseboard KiCad files?
From the retraux-design/accelerator-devkit repository on GitHub, at the commit this page was made from: the board is hardware/proto-0/baseboard/accelerator-devkit-proto-0-baseboard.kicad_pcb and its schematic hardware/proto-0/baseboard/accelerator-devkit-proto-0-baseboard-display-io.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Accelerator devkit proto-0-baseboard design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers100 × 100 mm
- 4 layers55 × 55 mm
- 4 layers53.5 × 38 mm
- 4 layers60 × 62 mm
IEMU Base DB
ponderononon/IEMU_DevBoards
Kicad Schematic Files for the BASE and SENSOR Development Boards (Layout in Progress)
176 parts - 4 layers57.7 × 41 mm
Serre
RubisCatty/Serre-Connecte
Projet final du programme de Génie Électrique par Sonia Michaud
65 parts - 6 layers91.9 × 80.3 mm
- 6 layers100 × 60 mm
Aether
nasheed-x/aether
Aether is a versatile flight computer for testing flight hardware and software, focusing on sensor fusion to monitor rocket states and interface with on-board systems.
180 parts10