
TeamTempSensorEE31 v0 3a preroute
remren/ee193embedded
Repository for EE 193 — Networked embedded systems, during Spring 2024. Course taught by Prof. Steven Bell

Repository for EE 193 — Networked embedded systems, during Spring 2024. Course taught by Prof. Steven Bell
Hw2breakout is an open-source printed circuit board by remren, from the remren/ee193embedded repository on GitHub. It is a 2-layer board of 30.5 × 33 mm with 10 parts on 11 nets, routed with 115 tracks and 0 vias.
It is built around the PCT2075DP. Its parts include 5 resistors, 1 capacitor, 1 IC, 1 diode and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1.5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5 |
| 1 | 0.1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | PCT2075DP | Package_SO:TSSOP-8_3x3mm_P0.65mm | U1 |
| 1 | Thermistor | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | TH1 |

remren/ee193embedded
Repository for EE 193 — Networked embedded systems, during Spring 2024. Course taught by Prof. Steven Bell

remren/ee193embedded
Repository for EE 193 — Networked embedded systems, during Spring 2024. Course taught by Prof. Steven Bell

remren/ee193embedded
Repository for EE 193 — Networked embedded systems, during Spring 2024. Course taught by Prof. Steven Bell

remren/ee193embedded
Repository for EE 193 — Networked embedded systems, during Spring 2024. Course taught by Prof. Steven Bell

MelkhiorVintageComputing/SBusFPGA
Stuff to put a FPGA in a SBus system (SPARCstation)

MelkhiorVintageComputing/VintageBusFPGA_Common
Common stuff for SBusFPGA, NuBusFPGA, ...

alanmimms/nexrig
A ham oriented SSB exciter for 160m-10m that uses a PC or Raspberry Pi USB host as UI and DSP.

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
It measures 30.5 × 33 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the PCT2075DP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the remren/ee193embedded repository on GitHub, at the commit this page was made from: the board is hw/hw2/hw2breakout/hw2breakout.kicad_pcb and its schematic EE193ConceptualDesign/Team Temp Sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask remren before reusing the design.