
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

tusi avionics framework based on arduino
Avionics is an open-source printed circuit board by remontree, from the remontree/arduino-avionics-framework repository on GitHub. It is a 2-layer board of 118.5 × 71.5 mm with 36 parts on 96 nets, routed with 143 tracks and 0 vias.
It belongs with the AVR (ATmega, ATtiny) boards of this library.
This project provides a framework for Arduino to quickly build and maintain Rocket Avionics and can be expanded according to the user's intentions. Users can easily add various sensors they want to use to the Avionics system, set them to perform custom missions, and help manage mission performance by flight stage throughout the entire flight process. This is significant in that it provides an expandable avionics framework based on Arduino, which is easily accessible, instead of existing expensive avionics such as Pixhawk. In addition, it provides not only software but also hardware design that includes basic sensors needed for avionics, helping to produce a low-cost avionics system in a short time.
In order to reduce unnecessary bit transmission during the communication process and ensure communication reliability and real-time, packets were designed and protocols were created.
Data types are classified as follows. At this time, rocketstate, cmd, etc. must transmit and receive data accurately, so like the TCP protocol, when data is received from the receiver, it sends an ACK to the transmitter. If the ACK is not received from the transmitter, it is designed to transmit the data one more time. Like sensor telemetry, it sends an ACK to the transmitter. Data where real-time is important were excluded from this process.

The hardware basically consists of GPS, IMU, barometer, SD reader, motor, and communication module. In addition, the user can replace and add sensors as needed. The initial version of the hardware used a breadboard, and the latest version had a new PCB design to increase stability.
excluded from this process.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | , , , , , , , , , , , , , , , +3 | ||
| 6 | ~ | avionics:motor_vcc | U6, U7, U8, U9, U10, U11 |
| 6 | ~ | avionics:motor_gnd | U12, U13, U14, U15, U16, U17 |
| 1 | ALT | avionics:bmp280 | U5 |
| 1 | Arduino_Mega2560_R3_Shield | arduino-library:Arduino_Mega2560_R3_Shield | A1 |
| 1 | GPS | avionics:gps | U3 |
| 1 | SD | avionics:sd | U4 |
| 1 | xbee | avionics:xbee | U2 |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!


Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.


It measures 118.5 × 71.5 mm and has 2 copper layers, 1.6 mm thick.
36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the remontree/arduino-avionics-framework repository on GitHub, at the commit this page was made from: the board is pcb/avionics.kicad_pcb and its schematic pcb/avionics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask remontree before reusing the design.