2 layers37 × 19 mm
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
2 parts4.4kGPL-2.0
2 layers22.9 × 50.8 mm
D52M Feather Wing
reeganm/ANT-FeatherWing10ANT Radio breakout board for Adafruit Feather development boards
- Size
- 22.9 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 2
- Nets
- 45
- Pads
- 63
- Tracks, vias
- 78, 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 May 2019
- Updated
- 12 Sep 2019
Overview
D52M Feather Wing is an open-source printed circuit board by reeganm, from the reeganm/ANT-FeatherWing repository on GitHub, published under the MIT licence. It is a 2-layer board of 22.9 × 50.8 mm with 2 parts on 45 nets, routed with 78 tracks and 4 vias.
It belongs with the microcontroller boards and radio and wireless boards and the ESP32 boards of this library.
README
README.mdANT FeatherWing
Usage
You can order this board using the gerber and BOM (sockets/pins not included in the BOM.) We ordered ours from Seeedstudio and they work fantastic.
Limitations
This board is restricted to ASYNC mode with the ANT radio. This is to optimize the pin usage since the ANT radio is the SPI master and Arduino does not support being a SPI slave. There will be an additional breakout board published in which those interested in using SPI will have those pins broken out.
Drivers
The board can use any generic ANT driver but we recommend ant-arduino but you will have to set all pins manually other than TX/RX. If you are looking for ANT+ support we recommend antplus-arduino.
Pin Mapping
| Name | D52 Pin | Feather Pin |
|---|---|---|
| RESET | P207 | 33 |
| SLEEP | P202 | 27 |
| SUSPEND | P215 | 4 |
| BR1 | P210 | 32 |
| BR2 | P213 | 21 |
| BR3 | P212 | 14 |
| RX | P218 | 17 |
| TX | P217 | 16 |
Renderings
Layout Rendering
Print Examples
HUZZAH32 Stack
Questions/Feedback
Questions about this project should be posted to http://groups.google.com/group/ant-api?pli=1 Be sure to provide as much detail as possible (e.g. what radios, firmware versions, configuration and code).
Parts
2| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | D52MxxM8 | RF_Module:Garmin_M8-35_9.8x14.0mm_Layout6x6_P1.5mm | U2 |
| 1 | ESP32FEATHER | ESP32FEATHER:ESP32FEATHER | U1 |
Similar boards
- 2 layers33 × 19 mm
- 2 layers
Diode template
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
2 parts547GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 button
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
2 parts546MIT - 2 layers35.1 × 46.8 mm
SDEX2M2 Breakout Board
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
2 parts542GPL-3.0 - 2 layers59.3 × 36.6 mm
ExpansionBoardTemplate
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
2 parts459GPL-3.0 - 2 layers
Alpha.9mm.wire
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
2 parts410 - 2 layers26.7 × 64 mm
Questions
How big is the D52M Feather Wing PCB?
It measures 22.9 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the D52M Feather Wing use?
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the D52M Feather Wing KiCad files?
From the reeganm/ANT-FeatherWing repository on GitHub, at the commit this page was made from: the board is Version 1/D52M Feather Wing.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the D52M Feather Wing design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).