
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Blueshift Robotics Motherboard Design Files
Lasagna motherboard is an open-source printed circuit board by redshiftrobotics, from the redshiftrobotics/blueshift-motherboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 230.4 × 97.8 mm with 21 parts on 76 nets, routed with 103 tracks and 0 vias.
Its parts include 14 ICs and 5 connectors. It belongs with the computers and single-board computers and robots and motor control boards of this library.
Blueshift Robotics Motherboard Design Files
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | ESC | lasagna-motherboard:ESC | U6, U7, U8, U9, U10, U11, U12, U13 |
| 2 | 7805_TO-220_Voltage_Regulator | lasagna-motherboard:Voltage Regulator TO255 | VR1, VR2 |
| 2 | Servo_Connector | lasagna-motherboard:Servo PWM Connector | J4, J5 |
| 1 | Adafruit_BNO055_IMU | lasagna-motherboard:Adafruit_BNO055_IMU | U1 |
| 1 | Adafruit_PCA9685_PWMGen | lasagna-motherboard:Adafruit_PCA9685_PWMGen | U5 |
| 1 | ESC_Holder_Mounting_Holes | lasagna-motherboard:ESC Holder mounting Holes | U14 |
| 1 | FathomX | lasagna-motherboard:FathomX | U4 |
| 1 | Fathom_X_Connector | lasagna-motherboard:FathomX_Connector | J2 |
| 1 | Jetson_Power_Connector | lasagna-motherboard:Jetson Power Connector | J1 |
| 1 | Jetson_Xavier_NX_Mounting_Holes | lasagna-motherboard:Jetson_Xavier_NX_Mounting_Holes | U2 |
| 1 | Jetson_Xavier_NX_Pins | lasagna-motherboard:Jetson_Xavier_NX_2X20_Pin_Header | U3 |
| 1 | Power_Connector | lasagna-motherboard:Power_Connector | J3 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 230.4 × 97.8 mm and has 2 copper layers, 1.6 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the redshiftrobotics/blueshift-motherboard repository on GitHub, at the commit this page was made from: the board is lasagna-motherboard/lasagna-motherboard.kicad_pcb and its schematic lasagna-motherboard/lasagna-motherboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).