2 layers123 × 87.5 mm
FastLOGIC
Neumi/fastLOGIC
An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.
180 parts23MIT
2 layers150 × 80.2 mm
Placa de interface clp
Rdisrael/CLP- Size
- 150 × 80.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 35
- Pads
- 97
- Tracks, vias
- 116, 0
- Pours
- 92
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Sep 2024
- Updated
- 10 Jun 2025
Overview
Placa de interface clp is an open-source printed circuit board by Rdisrael, from the Rdisrael/CLP repository on GitHub. It is a 2-layer board of 150 × 80.2 mm with 43 parts on 35 nets, routed with 116 tracks and 0 vias.
It is built around the EL817. Its parts include 14 resistors, 10 connectors, 7 ICs, 7 diodes and 1 switch. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdCLP
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14 |
| 10 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1, J4, J5, J6, J7, J8, J9, J10, J11, J12 |
| 7 | EL817 | Package_DIP:DIP-4_W7.62mm | U1, U4, U5, U6, U7, U8, U9 |
| 7 | LED | LED_THT:LED_D5.0mm_IRBlack | D1, D2, D3, D4, D5, D6, D7 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 1 | SW_SPDT_312 | chave:SW_100SP1T1B4M2QE | SW1 |
Questions
How big is the Placa de interface clp PCB?
It measures 150 × 80.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Placa de interface clp use?
43 parts, built around the EL817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Placa de interface clp KiCad files?
From the Rdisrael/CLP repository on GitHub, at the commit this page was made from: the board is PLACA/placa de interface clp.kicad_pcb and its schematic PLACA/placa de interface clp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Placa de interface clp design in my own project?
Its repository states no licence, so its author keeps all rights: ask Rdisrael before reusing the design.
Similar boards
- 2 layers140.7 × 47.4 mm
EG8010 A1
Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)
201 parts17MIT - 4 layers97.5 × 99.9 mm
Esp32 wled controller
fellettigiacomo/esp32-WLED-4ch-controller
Open source 4 Channel esp32-powered WLED controller with 4 relays and built in level shifter
100 parts16CERN-OHL-S-2.0 - 2 layers37 × 90 mm
- 2 layers85.1 × 75.6 mm
- 2 layers70 × 30 mm
- 2 layers45 × 38 mm
- 2 layers51.6 × 18.5 mm
Anavi opto isolator
AnaviTechnology/anavi-opto-isolator
Opto-isolator board for Arduino, ESP32, Raspberry Pi, etc. Supports 12V to 3.3V, 12V to 5V, 24V to 3.3V, 24V to 5V.
6 parts2