2 layers100 × 79 mm
4 layers116.4 × 115.8 mm
Macropad5x5
rcludwick/Macropad5x51Macropad project
- Size
- 116.4 × 115.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 100
- Nets
- 111
- Pads
- 425
- Tracks, vias
- 568, 86
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Jul 2024
- Updated
- 1 Oct 2024
Overview
Macropad5x5 is an open-source printed circuit board by rcludwick, from the rcludwick/Macropad5x5 repository on GitHub, published under the MIT licence. It is a 4-layer board of 116.4 × 115.8 mm with 100 parts on 111 nets, routed with 568 tracks and 86 vias.
It is built around the SN74LV1T125DBV and 1N4148W. Its parts include 60 diodes, 2 capacitors, 2 resistors, 2 ICs and 2 switches. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
2
SN74LV1T125DBV
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 10uA 5.5ns@5V,15pF 74LV 8mA 8mA Tri-State Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
Parts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | choc_SK6812MINI-E | Macropad:LED_choc_6028R | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +19 |
| 25 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +9 |
| 20 | MX_SW_HS | Macropad:SW_Cherry_MX_PCB_1.00u | MX1, MX2, MX3, MX4, MX11, MX12, MX13, MX14, MX16, MX17, MX18, MX19, MX21, MX22, MX23, MX24 +4 |
| 4 | MX_SW_HS | Macropad:SW_Cherry_MX_PCB_1.25u | MX10, MX15, MX20, MX25 |
| 4 | MountingHole | MountingHole:MountingHole_3mm | M1, M2, M3, M4 |
| 3 | MountingHole | Macropad:JLCPCB_Tooling_Hole | M5, M6, M7 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1, SW2 |
| 1 | PicoW | Macropad:RPi_PicoW_SMD_TH_NOSWD | U1 |
| 1 | RotaryEncoder_Switch | Macropad:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | MX5 |
| 1 | SN74LV1T125DBV | Package_TO_SOT_SMD:SOT-23-5 | U4 |
Similar boards
- 2 layers76.2 × 116.7 mm
Teds kb numpad
DovydasTEDS/teds-kb-numpad
a numpad / 17-key keypad with per-key rgb lighting, qmk firmware and soon to be added via and possibly signalrgb support!
54 parts - 2 layers293.4 × 118.8 mm
Unicorne choc
EyalYe/unicorne
A unibody Corne: both halves of the Corne v3 key layout on one PCB, each half rotated 16°, with an Azoteq TPS43 trackpad in the middle (it sits on the case, over the nice!nano) and a nice!nano v2 at the top.
175 parts - 2 layers312.5 × 122.3 mm
- 2 layers116.8 × 73.7 mm
DuPal V3
DuPAL-PAL-DUmper/DuPAL_Board
This repository contains the KiCad files and the gerber files for the DuPAL boards.
133 parts57CC-BY-SA-4.0 - 4 layers65 × 56 mm
Copilot Lite
BayLibre/Copilot
Manage a DUT power and serial through a single USB port, no additional software required.
80 parts22MIT - 2 layers121.9 × 81 mm
Cav16 pico
Charading/SHEGO16-QMK-Hall-Effect-Macropad
An RP2040-powered 4x4 15 key macropad with a knob on the top row, that runs custom QMK firmware that allows analogue hall effect sensors to work, also has SOCD, works with VIA and SignalRGB
132 parts3 - 4 layers70 × 30 mm
Usb led controller
kcuzner/usb-led-controller
This is an LED controller for the lights that came with my In-Win A1 Mini-ITX Tower. It came with a simple 12V RGB LED strip, rather than the now-standard WS2812 addressable LED strips that are so common in today's PCs.
115 parts2
Questions
How big is the Macropad5x5 PCB?
It measures 116.4 × 115.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Macropad5x5 use?
100 parts, built around the SN74LV1T125DBV and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Macropad5x5 KiCad files?
From the rcludwick/Macropad5x5 repository on GitHub, at the commit this page was made from: the board is Macropad5x5.kicad_pcb and its schematic Macropad5x5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Macropad5x5 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).