

Clocky
- Size
- 93.9 × 45.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 137
- Pads
- 449
- Tracks, vias
- 878, 153
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 May 2025
- Updated
- 29 Jun 2026
Overview
Clocky is an open-source printed circuit board by rcls, from the rcls/monitor repository on GitHub. It is a 4-layer board of 93.9 × 45.6 mm with 88 parts on 137 nets, routed with 878 tracks and 153 vias.
It is built around the HEF4094BT, ENS220 and TPS7A0218DBV, with the HL2300 among its other parts. Its parts include 27 capacitors, 25 resistors, 12 ICs, 7 connectors and 4 transistors. It belongs with the STM32 boards of this library.
Main components
4HEF4094BT
SOP-16SOP-16 Shift Registers ROHSMDDShift RegistersENS220
LGA-10_L2.0-W2.0-P0.50-BLLGA-10_L2.0-W2.0-P0.50-BL New Arrivals ROHSSciosenseUncategorisedTPS7A0218DBV
SOT-23-5-40℃~+125℃@(Tj) 1 1.8V 130uVrms 200mA 25nA 450mV@(200mA) 55dB@(1kHz) 6V Fixed Over Current Protection、Over Temperature Protection、Thermal Shutdown Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsHL2300
SOT-23-55℃~+150℃ 1 N-channel 1W 20V 20mΩ@4.5V 4.5A 418pF 6.06nC@4.5V 600mV 70pF 82pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10n | Capacitor_SMD:C_0402_1005Metric | C8, C10, C12, C17, C18, C19, C20, C22, C23 |
| 7 | 0u1 | Capacitor_SMD:C_0402_1005Metric | C1, C3, C5, C7, C21, C25, C27 |
| 6 | HEF4094B | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3, U4, U5, U6, U7, U8 |
| 5 | 100 | Resistor_SMD:R_0402_1005Metric | R15, R16, R17, R18, R19 |
| 5 | TestPoint_Probe | Parts:TestPoint | TP1, TP2, TP3, TP4, TP5 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R12, R20, R21, R22 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R23, R24, R25 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric | C13, C15, C16 |
| 3 | TestPoint | Parts:Dummy | TP6, TP7, TP8 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C6, C9 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C2, C4 |
| 2 | 330p | Capacitor_SMD:C_0402_1005Metric | C24, C26 |
| 2 | 33k | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | 3M9 | Resistor_SMD:R_0603_1608Metric | R3, R6 |
| 2 | HL2300 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | JFET | Package_TO_SOT_SMD:SOT-23-3 | Q3, Q4 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 100u | Capacitor_SMD:C_1206_3216Metric | C11 |
| 1 | 10u | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | 22u | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L2 |
| 1 | 32768Hz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 330k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 3M6 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 430k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 47u | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 5M1 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 5V1 | Diode_SMD:D_SOD-323 | D1 |
| 1 | 634k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 6M2 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 6M8 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | BQ25570 | Parts:QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2x2mm | U2 |
| 1 | Bot 40 pin | Parts:PinSocket_1x20_P2.54mm_Vertical | J4 |
| 1 | Bot 50 pin | Parts:PinHeader_1x25_P2.54mm_Vertical | J6 |
| 1 | CAP | Parts:TwoPin_P3.5mm | J2 |
| 1 | ENS212 | Package_DFN_QFN:AMS_QFN-4-1EP_2x2mm_P0.95mm_EP0.7x1.6mm | U12 |
| 1 | ENS220 | Parts:ENS220 | U11 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | STM32U031C8Ux | Parts:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | Skedd | Parts:Skedd6 | J3 |
| 1 | TMP117xxDRV | Parts:WSON-6-1EP_2x2mm_P0.65mm_NoEP | U10 |
| 1 | TPS7A0218DBV | Package_TO_SOT_SMD:SOT-23-5 | U9 |
| 1 | Top 40 pin | Parts:PinSocket_1x20_P2.54mm_Vertical | J5 |
| 1 | Top 50 pin | Parts:PinHeader_1x25_P2.54mm_Vertical | J7 |
| 1 | White | LED_SMD:LED_0603_1608Metric | D2 |
More from rcls/monitor
1- 4 layers35.5 × 33.7 mm

Similar boards
- 4 layers45 × 29.2 mm

Pocket 2.66
quintenluyten2/Pocket_2.66_E-reader_PCB
PCB for 2.13" and 2.66" E-ink displays with ESP32-C3, micro-SD card, battery management, and 3 user buttons
88 parts3 - 2 layers56 × 47 mm

Ulp flasher
LieBtrau/ultra-low-power-led-flasher
ATtiny13 firmware to drive the flasher
56 parts2GPL-3.0 - 4 layers20.3 × 90 mm

- 2 layers77.5 × 50.8 mm

- 2 layers160 × 100 mm

CLOCK
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
135 partsMIT - 2 layers51.4 × 147 mm

ST25
stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.
46 parts5BSD-2-Clause - 4 layers95 × 95 mm

Openmicro
conol-ai/openmicrokbd
Open-source recreation of OpenAI's Codex Micro macropad — PCB written in CoHDL, an AI-native hardware description language. Rust firmware (embassy) + companion app (makepad). MIT licensed. https://openmicrokbd.org
88 parts154MIT - 4 layers49.3 × 45.4 mm

Questions
How big is the Clocky PCB?
It measures 93.9 × 45.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Clocky use?
88 parts, built around the HEF4094BT, ENS220, TPS7A0218DBV and HL2300. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clocky KiCad files?
From the rcls/monitor repository on GitHub, at the commit this page was made from: the board is clocky.kicad_pcb and its schematic clocky.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clocky design in my own project?
Its repository states no licence, so its author keeps all rights: ask rcls before reusing the design.