Skip to the content
2 layers297 × 125 mmS16rf, the printed circuit board in 3D

Arquitetura de processador conceitual

Size
297 × 125 mm
Copper layers
2
Thickness
1.6 mm
Parts
105
Nets
215
Pads
1,074
Tracks, vias
3,038, 461
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
11 Dec 2025
Updated
24 Aug 2026

Overview

S16rf is an open-source printed circuit board by rcapaverde, from the rcapaverde/cubo repository on GitHub. It is a 2-layer board of 297 × 125 mm with 105 parts on 215 nets, routed with 3,038 tracks and 461 vias.

It is built around the 74LS193P-E, 74LS574N and 74HC238D. Its parts include 49 capacitors, 49 ICs, 5 connectors, 1 resistor and 1 diode.

Main components

3

README

README.md

cubo - um processador conceitual

Parts

105
QtyValueFootprintReferences
49100nFCapacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mmC1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +33
2074LS193Package_DIP:DIP-16_W7.62mmU1, U2, U3, U10, U11, U13, U15, U18, U19, U21, U23, U26, U27, U29, U31, U34 +4
2074LS244Package_DIP:DIP-20_W7.62mmU5, U12, U14, U16, U17, U20, U22, U24, U25, U28, U30, U32, U33, U36, U38, U40 +4
774LS574Package_DIP:DIP-20_W7.62mmU41, U42, U44, U45, U47, U49, U50
2r16_Cedge_connector:conector 02x08J2, J5
11KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
174HC238Package_DIP:DIP-16_W7.62mmU43
174LS138Package_DIP:DIP-16_W7.62mmU46
1PWRLED_THT:LED_D5.0mmD1
1r16_Aedge_connector:conector 02x08J3
1r16_Bedge_connector:conector 02x08J4
1r16_Dedge_connector:conector 02x08J1

More from rcapaverde/cubo

12
  • 2 layers120.6 × 47 mmUla8-rom, the printed circuit board in 3D

    Ula8-rom

    rcapaverde/cubo

    Arquitetura de processador conceitual

    154 parts
  • 2 layers137.8 × 73.6 mmUla8da, the printed circuit board in 3D

    Ula8da

    rcapaverde/cubo

    Arquitetura de processador conceitual

    139 parts
  • 2 layers160.7 × 210 mmClu, the printed circuit board in 3D

    Clu

    rcapaverde/cubo

    Arquitetura de processador conceitual

    124 parts
  • 2 layers160.7 × 210 mmClua, the printed circuit board in 3D

    Clua

    rcapaverde/cubo

    Arquitetura de processador conceitual

    86 parts
  • 2 layersMem, the printed circuit board in 3D

    Mem

    rcapaverde/cubo

    Arquitetura de processador conceitual

    85 parts
  • 2 layers126.3 × 210 mmUla8a, the printed circuit board in 3D

    Ula8a

    rcapaverde/cubo

    Arquitetura de processador conceitual

    81 parts
  • 2 layersRegs, the printed circuit board in 3D

    Regs

    rcapaverde/cubo

    Arquitetura de processador conceitual

    74 parts
  • 2 layers274.3 × 124.5 mmTestbench, the printed circuit board in 3D

    Testbench

    rcapaverde/cubo

    Arquitetura de processador conceitual

    70 parts
  • 2 layers297 × 75 mmSysbus, the printed circuit board in 3D

    Sysbus

    rcapaverde/cubo

    Arquitetura de processador conceitual

    63 parts
  • 2 layers77.5 × 125 mmClocka, the printed circuit board in 3D

    Clocka

    rcapaverde/cubo

    Arquitetura de processador conceitual

    62 parts
  • 2 layers209.5 × 125.1 mmM16rfa, the printed circuit board in 3D

    M16rfa

    rcapaverde/cubo

    Arquitetura de processador conceitual

    58 parts
  • 2 layers209.5 × 125.1 mmM16rf, the printed circuit board in 3D

    M16rf

    rcapaverde/cubo

    Arquitetura de processador conceitual

    55 parts

Similar boards

  • 4 layers304.5 × 217.2 mmLatest Full Backplane, the printed circuit board in 3D

    Latest Full Backplane

    Trilobyte-CPU/8-bit-computer

    A DIY 8-bit computer built mostly with discrete logic chips

    478 parts2
  • 2 layers235 × 176.5 mmCpu, the printed circuit board in 3D

    Cpu

    Edgeworth/memepu

    cmake -DUSEAFL=yes -DCMAKEBUILDTYPE=Release $PFX/verymeme AFLSKIPCPUFREQ=yes AFLPRELOAD=/usr/local/lib/afl/libdislocator.so \ afl-fuzz -m 1024M -i $PFX/verymeme/testdata/memelang/parsing -o memelangfuzz \ -x…

    286 parts9GPL-3.0
  • 2 layers81.3 × 86.4 mmZ80-cmos nmos tester, the printed circuit board in 3D

    Z80-cmos nmos tester

    djtersteegc/z80-cmos-nmos-tester

    Z80 CPU tester PCB

    41 parts61MIT
  • 4 layers121.9 × 91.4 mmAVG Discrete KiCad, the printed circuit board in 3D

    AVG Discrete KiCad

    nmikstas/atari-avg-replacements

    Atari AVG chip replacements. Both CPLD andTTL versions of the chip.

    214 parts14
  • 2 layers299.2 × 180 mm2layer, the printed circuit board in 3D

    2layer

    ceteras/CoBra

    A Z80 retro computer, ZX Spectrum compatible, can also run CP/M.

    369 parts11MIT
  • 2 layers150 × 100 mmMemory loader, the printed circuit board in 3D

    Memory loader

    TomNisbet/sap-plus

    Simple As Possible (SAP) 8-bit computer with a modular PCB design

    66 parts11MIT
  • 2 layers450 × 160 mmSquale, the printed circuit board in 3D

    Squale

    jfdelnero/Apollo_7_Squale

    Apollo 7 Squale computer dev tools

    219 parts6
  • 2 layers299.2 × 180 mmCobra XP, the printed circuit board in 3D

    Cobra XP

    ceteras/Cobra-XP

    Derived from Cobra, an experimental board for testing all kind of mods.

    452 parts5MIT

Questions

How big is the S16rf PCB?

It measures 297 × 125 mm and has 2 copper layers, 1.6 mm thick.

What parts does the S16rf use?

105 parts, built around the 74LS193P-E, 74LS574N and 74HC238D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the S16rf KiCad files?

From the rcapaverde/cubo repository on GitHub, at the commit this page was made from: the board is pcb_v3/s16rf/s16rf.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the S16rf design in my own project?

Its repository states no licence, so its author keeps all rights: ask rcapaverde before reusing the design.