

Clock cpa
Arquitetura de processador conceitual
- Size
- 133.3 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 40
- Pads
- 122
- Tracks, vias
- 260, 16
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Dec 2025
- Updated
- 24 Aug 2026
Overview
Clock cpa is an open-source printed circuit board by rcapaverde, from the rcapaverde/cubo repository on GitHub. It is a 2-layer board of 133.3 × 33 mm with 29 parts on 40 nets, routed with 260 tracks and 16 vias.
Its parts include 13 resistors, 8 switches, 4 capacitors and 4 connectors. It belongs with the lEDs and displays boards of this library.
README
README.mdcubo - um processador conceitual
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R5, R6, R15, R21 |
| 6 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R9, R11, R12, R13 |
| 4 | 100nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C3, C5 |
| 2 | control panel | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J2, J3 |
| 1 | 1HZ | clock-buttons:TS5 LED Momentary Click Tact Switch | SW1 |
| 1 | 1KHZ | clock-buttons:TS5 LED Momentary Click Tact Switch | SW2 |
| 1 | BREAK | clock-buttons:TS5 LED Momentary Click Tact Switch | SW6 |
| 1 | CLK OUT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | CLOCK_RESET | clock-buttons:Slide Switch DPDT | SW7 |
| 1 | EXT | clock-buttons:TS5 LED Momentary Click Tact Switch | SW5 |
| 1 | EXT IN | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | HALF-STEP | clock-buttons:TS5 LED Momentary Click Tact Switch | SW8 |
| 1 | STEP | clock-buttons:TS5 LED Momentary Click Tact Switch | SW9 |
| 1 | XTAL | clock-buttons:TS5 LED Momentary Click Tact Switch | SW3 |
More from rcapaverde/cubo
12- 2 layers120.6 × 47 mm

- 2 layers137.8 × 73.6 mm

- 2 layers160.7 × 210 mm

- 2 layers297 × 125 mm

- 2 layers160.7 × 210 mm

- 2 layers

- 2 layers126.3 × 210 mm

- 2 layers

- 2 layers274.3 × 124.5 mm

- 2 layers297 × 75 mm

- 2 layers77.5 × 125 mm

- 2 layers209.5 × 125.1 mm

Similar boards
- 2 layers52.3 × 10.5 mm

StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
29 parts5.1kGPL-3.0 - 2 layers56 × 20 mm

HallEffectXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
29 parts1.1kGPL-3.0 - 2 layers50 × 23.2 mm

Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
29 parts1kGPL-3.0 - 2 layers16.8 × 13.6 mm

E Fidget Lite
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
29 parts915 - 2 layers85 × 12.5 mm

TERES PCB3-TOUCH BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
29 parts578Apache-2.0 - 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers80 × 55 mm

- 2 layers55 × 58 mm

Questions
How big is the Clock cpa PCB?
It measures 133.3 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Clock cpa use?
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clock cpa KiCad files?
From the rcapaverde/cubo repository on GitHub, at the commit this page was made from: the board is pcb_v2/clock-cpa/clock-cpa.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clock cpa design in my own project?
Its repository states no licence, so its author keeps all rights: ask rcapaverde before reusing the design.