
DUT Interface board v0.2
krishchan007/DUT_Interface_board_v0.2
v0.2 of DUT interface board with significant changes in layout, architecture etc.

Adapter for connection hls_lfcd2 lidar to RaspberryPi
Rpi2 hls lfcd2 is an open-source printed circuit board by razykov, from the razykov/rpi2_hls_lfcd2 repository on GitHub. It is a 2-layer board of 77.5 × 35.6 mm with 14 parts on 43 nets, routed with 114 tracks and 8 vias.
It is built around the LM2596S-5.0, MBR0520 and TSM2302CX RFG. Its parts include 4 connectors, 3 diodes, 2 capacitors, 2 resistors and 1 IC.
Adapter for connection hls_lfcd2 lidar to RaspberryPi
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1N5824 | Diode_SMD:D_SMA_Handsoldering | D2 |
| 1 | 220uF | Capacitor_SMD:CP_Elec_8x10.5 | C1 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 33uH | Inductor_SMD:L_7.3x7.3_H4.5 | L1 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 680uF | Capacitor_SMD:CP_Elec_8x10.5 | C2 |
| 1 | Conn_12V | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | J4 |
| 1 | HLS-LFCD2 | Connector_JST:JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | D1 |
| 1 | IR_sensor | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J2 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
| 1 | MBR0520 | Diode_SMD:D_SOD-123 | D3 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | TSM2302CX | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | motor_conn | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |

krishchan007/DUT_Interface_board_v0.2
v0.2 of DUT interface board with significant changes in layout, architecture etc.


ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!


paltatech/VESC-controller
Made open source with KiCAD, an open source EDA tool.
Spritetm/picframe_colepd
A WiFi picture frame allowing for remote photo uploads, using an ESP32-C3 and a 5.6" color E-ink display

It measures 77.5 × 35.6 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the LM2596S-5.0, MBR0520 and TSM2302CX RFG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the razykov/rpi2_hls_lfcd2 repository on GitHub, at the commit this page was made from: the board is rpi2_hls_lfcd2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask razykov before reusing the design.