
CompaqportableIII
raymondh2/CompaqPortableIII
Current PCB Memory Expansion board layout is untested. The backplane for the expansion cards is tested and working.

Current PCB Memory Expansion board layout is untested. The backplane for the expansion cards is tested and working.
CompaqPortableIIImemexp is an open-source printed circuit board by raymondh2, from the raymondh2/CompaqPortableIII repository on GitHub. It is a 4-layer board of 142.2 × 104.1 mm with 32 parts on 149 nets, routed with 1,309 tracks and 111 vias.
It is built around the 74F245D and 74F244D. Its parts include 9 capacitors, 7 ICs and 7 connectors.
Current PCB Memory Expansion board layout is untested. The backplane for the expansion cards is tested and working.
Recreation of U10 Part Number 107393-001 working as expected so far. Recreation of U20 Part Number 107392-001 is untested.
The mainboard schematics are not verfied or complete.
Replacement Battery Module by Sergey Kiselev GitHub
This work is licensed under the CERN Open Hardware License v2 Strongly Reciprocal. See here.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 47n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C3, C4, C5, C6, C7, C8, C9 |
| 6 | Conn_SIMM30 | raysstuff:Conn_SIMM30 | J001, J002, J003, J004, J005, J006 |
| 4 | 33 | Resistor_THT:R_Array_SIP10 | RN1, RN2, RN3, RN4 |
| 2 | 10u | Capacitor_THT:CP_Radial_Tantal_D6.0mm_P5.00mm | C1, C2 |
| 2 | 74F245 | Package_DIP:DIP-20_W7.62mm | U5, U6 |
| 2 | 74F32 | Package_DIP:DIP-14_W7.62mm | U2, U4 |
| 2 | 8.2k | Resistor_THT:R_Array_SIP10 | RN5, RN6 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_4mm | H1, H2 |
| 1 | 74F00 | Package_DIP:DIP-14_W7.62mm | U3 |
| 1 | 74F10 | Package_DIP:DIP-14_W7.62mm | U7 |
| 1 | 74F244 | Package_DIP:DIP-20_W7.62mm | U1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | E1 |
| 1 | Conn_02x40_Counter_Clockwise | raysstuff:Conn_Edge_PCB_02x40_mirror_memexp | J114 |

raymondh2/CompaqPortableIII
Current PCB Memory Expansion board layout is untested. The backplane for the expansion cards is tested and working.

raymondh2/CompaqPortableIII
Current PCB Memory Expansion board layout is untested. The backplane for the expansion cards is tested and working.

raymondh2/CompaqPortableIII
Current PCB Memory Expansion board layout is untested. The backplane for the expansion cards is tested and working.

skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset

monotech/NuXT
MicroATX Turbo XT Motherboard, with VGA, Floppy, CF, Serial


monotech/Nano8088
Smaller SMD version of Sergey Kiselev's Micro 8088 SBC, with XT-CF added

computerguy096/Aries-1
This is a work in progress micro-ATX 486 board, based off of the DTK 386 replica and the Prometheus VLB

punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark


ronnyroy111/inboard386
Reverse engineered schematics, PCB and logic equations for the Intel 386/PC accelerator
It measures 142.2 × 104.1 mm and has 4 copper layers, 1.6 mm thick.
32 parts, built around the 74F245D and 74F244D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the raymondh2/CompaqPortableIII repository on GitHub, at the commit this page was made from: the board is CompaqPortableIIImemexp/CompaqPortableIIImemexp.kicad_pcb and its schematic CompaqPortableIIIexpansionbackplane/CompaqPortableIIIexpansionbackplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask raymondh2 before reusing the design.