
Tradewind
binaryBeachLLC/tradewind
Tradewind TW-1: solar LoRaWAN field sensor. KiCad 9 board, CadQuery enclosure, RUI3 firmware, simulations, test data, report and datasheet.

NevermoreController is an open-source printed circuit board by raymondh2, from the raymondh2/NevermoreMaxController repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 58 × 56.5 mm with 50 parts on 49 nets, routed with 56 tracks and 9 vias.
It is built around the 74LVC1G17Z, AOZ1282CI and BAT54S, with the MFU0805FF03500P100, 1PS76SB10,115-JSM and S4B-PH-SM4-TB(LF)(SN) among its other parts. Its parts include 11 capacitors, 11 resistors, 9 connectors, 8 diodes and 4 ICs. It belongs with the SAM D and SAM boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C10, C11 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R4, R11, R12, R17 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric | R3, R15, R16 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 7p | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D4, D5 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 22uH 2A | Inductor_SMD:L_Bourns-SRN4018 | L1 |
| 1 | 3.5A | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering | Y1 |
| 1 | 3v3 | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | 49K9 | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 4k7 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 5v | LED_SMD:LED_0805_2012Metric | D11 |
| 1 | 74LVC1G17 | digikey-footprints:SOT-753 | U4 |
| 1 | 9k53 | Resistor_SMD:R_0805_2012Metric | R18 |
| 1 | AOZ1282CI | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | AP2127K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | ATSAMD21E18A-AUT | Package_QFP:TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | Conn_01x02 | Connector_Molex:Molex_Nano-Fit_105313-xx02_1x02_P2.50mm_Horizontal | J1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-323_HandSoldering | D8 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | FAN1 | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J5 |
| 1 | I2C0 | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J8 |
| 1 | I2C1 | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J6 |
| 1 | I2C2 | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J3 |
| 1 | I2C3 | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J7 |
| 1 | Neo | Connector_JST:JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_Horizontal | J10 |
| 1 | PMEG4020ER,115 | Diode_SMD:D_SOD-123 | D12 |
| 1 | RESET | Button_Switch_SMD:Panasonic_EVQPUL_EVQPUC | SW1 |
| 1 | STATUS | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J2 |
| 1 | VIN | LED_SMD:LED_0805_2012Metric | D1 |
It measures 58 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the 74LVC1G17Z, AOZ1282CI, BAT54S and MFU0805FF03500P100. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the raymondh2/NevermoreMaxController repository on GitHub, at the commit this page was made from: the board is kicad/NevermoreController.kicad_pcb and its schematic kicad/NevermoreController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

binaryBeachLLC/tradewind
Tradewind TW-1: solar LoRaWAN field sensor. KiCad 9 board, CadQuery enclosure, RUI3 firmware, simulations, test data, report and datasheet.



RSXLX/sunny-the-growing-sunflower-lamp
SUNNY — The Growing Sunflower Lamp | A personal lamp with customizable exteriors, traceable fabrication, and a local creative workspace.


phuid/laser_projector
this script installs all the dependencies of my programs and sets up the RaspberryPi to start all the programs on boot using pm2.

petermaerki/puenterswis_heizung_2023_git
Puenterswis Heizungsersatz, Steuerung Anlage mit Oekofen Kaskade Pellematic Maxi PESK