Skip to the content
2 layers116.8 × 64.8 mmTest project, the printed circuit board in 3D

KiCad Design for an Oscillator Board

Size
116.8 × 64.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
20
Pads
70
Tracks, vias
108, 2
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
11 Mar 2015
Updated
25 Mar 2015

Overview

Test project is an open-source printed circuit board by rayendumeldust, from the rayendumeldust/oscillator-design repository on GitHub. It is a 2-layer board of 116.8 × 64.8 mm with 21 parts on 20 nets, routed with 108 tracks and 2 vias.

It is built around the 74HC14. Its parts include 7 capacitors, 4 resistors, 2 ICs and 2 connectors.

Main components

1

README

README.md

oscillator-design

KiCad Design for an Oscillator Board

Parts

21
QtyValueFootprintReferences
6POTPotentiometers:Potentiometer_Trimmer-Piher_PT15-B_verticalRV1, RV2, RV3, RV4, RV5, RV6
5CPCapacitors_ThroughHole:C_Radial_D8_L13_P3.8C1, C2, C3, C4, C5
4RResistors_ThroughHole:Resistor_Horizontal_RM10mmR1, R2, R3, R4
2CPCapacitors_ThroughHole:C_Radial_D8_L21_P3.8C6, C7
174HC14Sockets_DIP:DIP-14__300_ELLU1
1CONN_01X02Connect:AK300-2P2
1CONN_01X06Connect:bornier6P1
1OP275Sockets_DIP:DIP-8__300_ELLU2

Similar boards

  • 2 layers89.2 × 82.6 mmDesktop 50 Pin TopConn, the printed circuit board in 3D

    Desktop 50 Pin TopConn

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    108 parts459GPL-3.0
  • 2 layers88.9 × 98.4 mmKickstart switcher-12up, the printed circuit board in 3D

    Kickstart switcher-12up

    keirf/pcb-projects

    The old Kickstart switcher documentation is here.

    197 parts108CC0-1.0
  • 2 layers100 × 100 mmExplorer, the printed circuit board in 3D

    Explorer

    anyshake/explorer

    🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

    266 parts100
  • 2 layers160.1 × 101 mmPLC-14500, the printed circuit board in 3D

    PLC-14500

    nicolacimmino/PLC-14500

    Retro trainer board based on the MC14500 1-bit ICU. The project is OSHW certified and a ready to assemble kit is available on Tindie.

    173 parts70GPL-3.0
  • 4 layers69 × 74 mmShield, the printed circuit board in 3D

    Shield

    imihajlow/ethernet-to-spi

    An Ethernet to SPI converter using 7400-series ICs

    60 parts69
  • 2 layers154.9 × 139.7 mm68kBoard, the printed circuit board in 3D

    68kBoard

    transistorfet/computie

    A collection of 68k computer projects, including a unix-like operating system written in C that runs on them

    78 parts69GPL-3.0
  • 2 layers100 × 100 mmController, the printed circuit board in 3D

    Controller

    profdc9/ModularTuner

    A Modular Antenna Tuner for a Phased Array Antenna System

    180 parts59

Questions

How big is the Test project PCB?

It measures 116.8 × 64.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Test project use?

21 parts, built around the 74HC14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Test project KiCad files?

From the rayendumeldust/oscillator-design repository on GitHub, at the commit this page was made from: the board is test-project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Test project design in my own project?

Its repository states no licence, so its author keeps all rights: ask rayendumeldust before reusing the design.