
Jitx design
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

NT hash cracker for FPGAs
Versaboard is an open-source printed circuit board by RavuAlHemio, from the RavuAlHemio/ntcrackfpga repository on GitHub. It is a 4-layer board of 61 × 43 mm with 30 parts on 97 nets, routed with 286 tracks and 115 vias.
Its parts include 10 capacitors, 4 connectors, 3 resistors, 2 inductors and 1 IC. It belongs with the fPGA and programmable logic boards and the SAM D and SAM boards of this library.
The cracker itself is structured to run on a Lattice ECP5 Evaluation Board (LFE5UM5G-85F-EVN; relevant settings may be found in src/ntcrackfpga.lpf and src/clockdiv.v). To provide a more convenient interface without attempting to implement I2C or UART in Verilog (and failing miserably), a Microchip-SAM-based Versa Board solution is implemented, which is meant to mate directly with the Versa pins on the evaluation board.
The centerpoint of the Versa Board is a Microchip (ex-Atmel) SAML21G18 microcontroller.
A KiCad hardware design is provided in this directory; the software implementation (in Rust) is in the software subdirectory.
The following SAML21 pins are used for the interconnection with the evaluation board:
| SAML21 pin | ECP5 Eval Board | function | direction | ECP5 ball |
|---|---|---|---|---|
| PB08 | J39 pin 19 | store_hash_byte | → | A9 |
| PB09 | J39 pin 20 | go | → | B10 |
| PA06 | J39 pin 29 | match_found | ← | E7 |
| PA07 | J39 pin 31 | your_turn | ← | A11 |
| PA08 | J40 pin 4 | new_hash_byte[0] | → | F1 |
| PA09 | J40 pin 6 | new_hash_byte[1] | → | G1 |
| PA10 | J40 pin 8 | new_hash_byte[2] | → | J5 |
| PA11 | J40 pin 10 | new_hash_byte[3] | → | K3 |
| PA12 | J40 pin 12 | new_hash_byte[4] | → | L5 |
| PA13 | J40 pin 14 | new_hash_byte[5] | → | N5 |
| PA14 | J40 pin 16 | new_hash_byte[6] | → | P5 |
| PA15 | J40 pin 18 | new_hash_byte[7] | → | M3 |
| PA16 | J40 pin 1 | output_byte[0] | ← | K2 |
| PA17 | J40 pin 5 | output_byte[1] | ← | H2 |
| PA18 | J40 pin 7 | output_byte[2] | ← | J4 |
| PA19 | J40 pin 9 | output_byte[3] | ← | J3 |
| PA20 | J40 pin 11 | output_byte[4] | ← | L4 |
| PA21 | J40 pin 13 | output_byte[5] | ← | M4 |
| PA22 | J40 pin 15 | output_byte[6] | ← | N4 |
| PA23 | J40 pin 17 | output_byte[7] | ← | N3 |
| PA25 | J40 pin 21 | step_active | → | K5 |
| PB23 | J40 pin 23 | step_clock | → | M5 |
| PB22 | J40 pin 25 | state_give | → | L3 |
| PB10 | J40 pin 27 | for future use 0 | tbd | N2 |
| PB11 | J40 pin 28 | for future use 1 | tbd | M1 |
| PA27 | J40 pin 29 | for future use 2 | tbd | L2 |
The following pins are used for other functions:
| SAML21 pin | function |
|---|---|
| PA00 | XIN32 (32kHz oscillator input) |
| PA01 | reserved for XOUT32 (32k osc. output) |
| PA02 | GND to ensure oscillator stability |
| PA03 | GND to ensure oscillator stability |
| PA04 | UART TX (board to PC) |
| PA05 | UART RX (PC to board) |
| PA24 | on-board LED |
| PA30 | SWCLK (debugging, clock signal) |
| PA31 | SWDIO (debugging, I/O) |
| PB02 | GND to ensure oscillator stability |
| PB03 | GND to ensure oscillator stability |
If you wish to have this board manufactured by JLCPCB, please note the following rotation differences:
| components | description | JLCPCB rotation |
|---|---|---|
| J1 | UART pins | 90° |
| J4 | debug header | 90° |
| J39, J40 | pin socket | 270° |
| U1 | microcontroller | 270°? (to be verified) |
JLCPCB-specific rotations can be specified in the KiCad JLCPCB Tools plugin.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C5, C6, C7, C8 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4 |
| 2 | 10µF | Capacitor_SMD:C_0603_1608Metric | C2, C10 |
| 2 | 10µH | Inductor_SMD:L_0603_1608Metric | L1, L2 |
| 2 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical_SMD | J39, J40 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 1µF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 2.2kΩ | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 32.768kHz | Oscillator:Oscillator_SMD_SeikoEpson_SG3030CM | X1 |
| 1 | 330Ω | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 68Ω | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | ATSAML21G18B-AUT | Package_QFP:TQFP-48-1EP_7x7mm_P0.5mm_EP5x5mm_ThermalVias | U1 |
| 1 | DBG | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J4 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | RST | Button_Switch_SMD_Custom:Shou_Han_TS24CA | SW1 |
| 1 | UART | Connector_PinHeader_2.54mm_Horizontal_SMD:Samtec_TSM-102-01-L-SH | J1 |
The 27 most common of 30 parts.

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards





inaxeon/ocu2pciex8
This repository contains the design files for a PCIe x4 (x8 physical) to OCuLink adapter I designed to solve some difficult PC build problems some time ago.

It measures 61 × 43 mm and has 4 copper layers, 1.6 mm thick.
30 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RavuAlHemio/ntcrackfpga repository on GitHub, at the commit this page was made from: the board is versaboard/versaboard.kicad_pcb and its schematic versaboard/versaboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RavuAlHemio before reusing the design.