2 layers40 × 50 mm
2 layers
SolarFlowmeterMonitor
ravilez/KiCad-Models- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 16
- Pads
- 73
- Tracks, vias
- 108, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 8 Dec 2025
- Updated
- 6 Oct 2026
Overview
SolarFlowmeterMonitor is an open-source printed circuit board by ravilez, from the ravilez/KiCad-Models repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 18 parts on 16 nets, routed with 108 tracks and 9 vias.
It is built around the XL6009, XC6206P332MR and AO3413. Its parts include 6 ICs, 4 resistors, 4 connectors, 2 capacitors and 2 transistors.
Main components
3XL6009
TO-263-5TO-263-5 DC-DC Converters ROHSXLSEMIDC-DC Converters
XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAO3413
SOT-23-55℃~+150℃ 1 P-Channel 1.4W 11nC@4.5V 130mΩ@1.8V 20V 3A 400mV 70pF 745pF SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdKiCad-Models
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R2, R4 |
| 1 | 100 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R3 |
| 1 | 100nF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1 |
| 1 | 10k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R1 |
| 1 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | Q2 |
| 1 | 470uF | Capacitor_SMD:CP_Elec_10x10.5 | C2 |
| 1 | AO3413 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x10_Pin | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | FlowMeter | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | LiCharger | Modules_uSPX:LiCharger-03962 | U4 |
| 1 | LoadSharing | Modules_uSPX:LiPO_SharePower | U3 |
| 1 | SP-pins | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | Solar Panel 280mA@18V | Connector_BarrelJack:BarrelJack_Horizontal | J4 |
| 1 | StepDown_LM2596 | Modules_uSPX:YAAJ_DCDC_StepDown_LM2596 | U1 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23-3 | U7 |
| 1 | XL6009 | Modules_uSPX:XL6009_module_TH | U2 |
| 1 | ~ | Modules_uSPX:ESP01-Breakout | U5 |
More from ravilez/KiCad-Models
2- 2 layers31 × 29 mm
Similar boards
- 2 layers56 × 44 mm
Cphp82001-pcb
calcpsu/cphp82001
CalcPack replacement for HP 82001, suits HP35/45/55/65/67 calculators
30 parts4 - 2 layers24.6 × 11.1 mm
PWM+fan stop
yvoronkin/FANSTOP
In a small form factor, an extension of the fan control is implemented.
24 parts2CERN-OHL-S-2.0 - 2 layers100 × 100 mm
- 2 layers51.4 × 43 mm
- 2 layers38.1 × 19.6 mm
- 2 layers99.9 × 99.8 mm
GR BreadBoardBuddy
GadgetReboot/Breadboard_Buddy
PCB with power supplies, audio amp, LEDs, pots and level shifters to make breadboarding easier.
161 parts3 - 2 layers101.5 × 55.8 mm
SilverZap
hanebuechenes/SilverZap
Generator für kolloidales SIlber / Gold nach Dr. Beck
40 parts1GPL-3.0 - 2 layers205.9 × 139.1 mm
CALIBRADOR EMULADOR SEÑALES ANALOGICAS
krauser01/portafolio-electronica-eric-rv
Portafolio Proyectos de Electrónica Ing. Eric Rodriguez Vasquez
67 parts1
Questions
What parts does the SolarFlowmeterMonitor use?
18 parts, built around the XL6009, XC6206P332MR and AO3413. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SolarFlowmeterMonitor KiCad files?
From the ravilez/KiCad-Models repository on GitHub, at the commit this page was made from: the board is SolarFlowmeterMonitor/SolarFlowmeterMonitor.kicad_pcb and its schematic LiPO_SharePower/LiPO_SharePower.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SolarFlowmeterMonitor design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).