2 layers229.5 × 95.1 mm
Sweep high
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
55 parts2.1k
2 layers82.6 × 101.6 mm
Indicator V2
ranaj007/Test_PCB- Size
- 82.6 × 101.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 44
- Pads
- 114
- Tracks, vias
- 203, 229
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 26 Aug 2022
- Updated
- 5 Sep 2022
Overview
Indicator V2 is an open-source printed circuit board by ranaj007, from the ranaj007/Test_PCB repository on GitHub. It is a 2-layer board of 82.6 × 101.6 mm with 55 parts on 44 nets, routed with 203 tracks and 229 vias.
It is built around the CRGP2512F15R, GS1G_R1_00001 and CR0805-JW-103ELF, with the ATM13-12PA-R008 among its other parts. Its parts include 26 resistors, 5 diodes, 3 connectors and 1 switch.
Main components
4
CRGP2512F15R
2512-55℃~+155℃ 15Ω 2W 500V Thick Film Resistor ±1% ±200ppm/℃ 2512 Chip Resistor - Surface Mount ROHSTE ConnectivityChip Resistor - Surface Mount
GS1G_R1_00001
SMA(DO-214AC)-55℃~+150℃ 1.1V@1A 1A 1uA@400V 35A 400V Independent SMA(DO-214AC) Diodes - General Purpose ROHSPANJIT InternationalDiodes - General Purpose
CR0805-JW-103ELF
0805-55℃~+155℃ 10kΩ 125mW 150V Thick Film Resistor ±200ppm/℃ ±5% 0805 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface MountATM13-12PA-R008
插件-55℃~+155℃ 12P 2 2x6P 4.2mm 6 6.35mm 7.5A Black Copper alloy Through Hole Tin 插件 Wire To Board Connector ROHSAmphenolWire To Board Connector
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 39 Ohm | Resistor_SMD:R_2512_6332Metric_thermal_pad | R1, R2, R10, R11, R12, R13, R14, R15, R17, R18, R19, R20, R21, R22, R23, R24 +8 |
| 5 | DIODE | Diode_SMD:D_SMA | D1, D2, D3, D4, D5 |
| 5 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2, JP3, JP4, JP5, JP6 |
| 4 | Bypass Resistor | TestPoint:TestPoint_Keystone_5000-5004_Miniature | BP-L1, BP-L2, BP-R1, BP-R2 |
| 4 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1, JP7, JP8, JP9 |
| 4 | TestPoint | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP-L1, TP-L2, TP-R1, TP-R2 |
| 3 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1.5mm | FID1, FID2, FID3 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 1 | 10k Ohm | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | ATM13-12PA-R008 | Library:ATM1312PAR008 | J1 |
| 1 | R2 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R5 |
| 1 | Relay_SPDT_Omron-G5LE-1 | Relay_THT:Relay_SPDT_Omron-G5LE-1 | K1 |
Questions
How big is the Indicator V2 PCB?
It measures 82.6 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Indicator V2 use?
55 parts, built around the CRGP2512F15R, GS1G_R1_00001, CR0805-JW-103ELF and ATM13-12PA-R008. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Indicator V2 KiCad files?
From the ranaj007/Test_PCB repository on GitHub, at the commit this page was made from: the board is Indicator V2.kicad_pcb and its schematic Connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Indicator V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ranaj007 before reusing the design.
Similar boards
- 2 layers370 × 11 mm
Daylight Disco XXL
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
55 parts1.1kGPL-3.0 - 2 layers370 × 10 mm
E3NGLEDstick
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
55 parts915 - 2 layers139.3 × 94.8 mm
Flake
lever-tech/flake
An open-source, wireless, split ergonomic keyboard designed to be productive, healthy, and enjoyable. [formerly Anywhy Flake]
55 parts531CERN-OHL-W-2.0 - 2 layers237.5 × 102.9 mm
Memory
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
55 parts301Unlicense - 2 layers60.6 × 24.1 mm
Blep hackerboard
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
55 parts253GPL-3.0 - 2 layers100 × 96.5 mm
Keyboard ch552-36-lhs
rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware
55 parts236 - 2 layers190.5 × 85.7 mm
Dissatisfaction30
dcpedit/dissatisfaction30
To get the PCB manufactured, upload dissat-pcb.zip to JLCPCB, select your desired PCB color while keeping all the other default options, and place your order (minimum 5).
55 parts147CC-BY-4.0