

RadarPCB
PSoC and MATLAB code
- Size
- 68.6 × 53.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 48
- Pads
- 115
- Tracks, vias
- 81, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Jun 2024
- Updated
- 16 Jul 2024
Overview
RadarPCB is an open-source printed circuit board by RakshithaKukkePrakash, from the RakshithaKukkePrakash/SDHD repository on GitHub. It is a 4-layer board of 68.6 × 53.3 mm with 46 parts on 48 nets, routed with 81 tracks and 0 vias.
Its parts include 12 resistors, 6 capacitors, 5 connectors, 4 diodes and 2 ICs.
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | TestPoint | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | GND_TP1, GND_TP3, GND_TP4, GND_TP5, GND_TP6, HPF1_TP, HPF2_TP, OP1_TP1, OP2_TP1, Signal_TP1, VtgD_TP |
| 4 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R5, R6, R7 |
| 4 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4 |
| 4 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | MH1, MH2, MH3, MH4 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | 4.7u | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C3, C5 |
| 2 | OPA340P | Package_DIP:DIP-8_W7.62mm | U1, U2 |
| 1 | 1.5n | Capacitor_THT:C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C4 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | 100nF | Capacitor_THT:C_Rect_L7.2mm_W3.0mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C2 |
| 1 | 150 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 220k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | 22u | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C1 |
| 1 | 3.3n | Capacitor_THT:C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C6 |
| 1 | 33.33k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | Analog | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | J5 |
| 1 | Digital/PWM | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | Digital/PWM | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | GND TestPoint | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | GND_TP2 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H7.3mm | SW1 |
Similar boards
- 4 layers48 × 80 mm

- 4 layers50 × 42 mm

Beam Offset Switch
nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.
46 parts371 - 4 layers53.3 × 34.5 mm

- 4 layers91.1 × 53.6 mm

Parallel2usb
tomverbeure/fake_parallel_printer
Capture traffic on parallel printer port to USB
46 parts95BSD-2-Clause - 4 layers105 × 47 mm

Pdu
azonenberg/latentred
Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch
46 parts36BSD-3-Clause - 4 layers44.5 × 22.5 mm

- 4 layers41.8 × 14.8 mm

Nrf52811 usb
alvarop/chaac
This is a work in progress for a wireless weather station project.
46 parts21MIT - 4 layers50.8 × 114.3 mm

Questions
How big is the RadarPCB PCB?
It measures 68.6 × 53.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the RadarPCB use?
46 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RadarPCB KiCad files?
From the RakshithaKukkePrakash/SDHD repository on GitHub, at the commit this page was made from: the board is PCB_Design_Project/10_work/80_RadarPCB_Project/RadarPCB.kicad_pcb and its schematic PCB_Design_Project/10_work/80_RadarPCB_Project/RadarPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RadarPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask RakshithaKukkePrakash before reusing the design.