

- Size
- 110 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 101
- Pads
- 337
- Tracks, vias
- 1,033, 41
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Apr 2024
- Updated
- 19 Apr 2024
Overview
HI-2401 is an open-source printed circuit board by rajuyadav79, from the rajuyadav79/PCB_2401_ms51_git repository on GitHub. It is a 2-layer board of 110 × 70 mm with 81 parts on 101 nets, routed with 1,033 tracks and 41 vias.
It is built around the M251SG6AE, MAX232N and W25Q128JVSIQ, with the 74HC238D, LTS-6960HR and SM4007 among its other parts. Its parts include 23 capacitors, 19 resistors, 8 connectors, 6 ICs and 4 diodes.
Main components
6M251SG6AE
LQFP-64(7x7)-40℃~+105℃ 1.75V~5.5V 256KB 32 Bit 32KB 48MHz 53 ARM Cortex-M23 Built-in+External FLASH LQFP-64(7x7) Microcontrollers (MCU/MPU/SOC) ROHSNuvoton TechMicrocontrollers (MCU/MPU/SOC)MAX232N
PDIP-160℃~+70℃ 120Kbps 2 2 4.5V~5.5V Transceiver PDIP-16 RS232 ICs ROHSTexas InstrumentsRS232 ICsW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH74HC238D
SOP-16SOP-16 Signal Switches, Multiplexers, Decoders ROHSMDDSignal Switches, Multiplexers, DecodersLTS-6960HR
DIP-10LED Segment DisplaysLite-OnSM4007
MELFMELF Diodes - General Purpose ROHSYONGYUTAIDiodes - General Purpose
README
README.mdPCB_2401_ms51
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 104 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C6, C7, C8, C10, C13, C14, C16, C17, C18, C20, C21, C22 |
| 8 | 10E | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R12 |
| 7 | , , , , , , | ||
| 7 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R9, R10, R11, R17, R18, R19 |
| 7 | LTS-6960HR | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | AFF1, AFF2, AFF3, AFF4, AFF5, AFF6, AFF7 |
| 4 | 22PF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4, C11, C12 |
| 4 | C_10MF/50V | Capacitor_THT:CP_Radial_Tantal_D5.0mm_P2.50mm | C5, C9, C15, C19 |
| 4 | SW_DIP_x01 | Button_Switch_THT:SW_PUSH-12mm | SW1, SW2, SW3, SW4 |
| 3 | 3.3K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14, R15, R16 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5, J7 |
| 2 | LED RED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2 |
| 1 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13 |
| 1 | 74HC238 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U7 |
| 1 | AP1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | AP1117-50 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_103_1x20mm | BT1 |
| 1 | C_100MF/50V | Capacitor_THT:CP_Radial_Tantal_D5.0mm_P2.50mm | C23 |
| 1 | Conn_01x02_Pin | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J6 |
| 1 | Conn_01x03 | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J8 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | Conn_01x05_Pin_prg | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | Crystal 16mhz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | Crystal_GND2 | Crystal:Crystal_AT310_D3.0mm_L10.0mm_Horizontal_1EP_style1 | Y2 |
| 1 | LED GREEN | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | M251SG6AE | Package_QFP:LQFP-64_7x7mm_P0.4mm | U2 |
| 1 | MAX232 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | SM4007 | Diode_SMD:D_MELF | D4 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
Similar boards
- 4 layers102 × 102 mm

- 2 layers155 × 75 mm

Hacklock-2137
p-durlej/hswaw-hscloud
Controller board for next gen hacklock door / lock / access control system.
119 parts - 2 layers98 × 71 mm

Mozc dial
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
112 parts3kApache-2.0 - 2 layers174 × 111 mm

Pedalboard hw
pedalboard/pedalboard-hw
pedalboard audio midi processor open hardware
169 parts14CERN-OHL-P-2.0 - 2 layers99.1 × 99 mm

XDuinoRail Debug
chatelao/xDuinoRail-Decoder
The friendly decoder development plattform for model railroad tinkers.
170 partsAGPL-3.0 - 4 layers100 × 100 mm

- 2 layers30 × 109 mm

Laser controller
adeboni/eurorack
This repository stores various eurorack module designs I've made
124 parts1GPL-3.0 - 2 layers70.8 × 108 mm

Questions
How big is the HI-2401 PCB?
It measures 110 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HI-2401 use?
81 parts, built around the M251SG6AE, MAX232N, W25Q128JVSIQ and 74HC238D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HI-2401 KiCad files?
From the rajuyadav79/PCB_2401_ms51_git repository on GitHub, at the commit this page was made from: the board is HI-2401.kicad_pcb and its schematic HI-2401.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HI-2401 design in my own project?
Its repository states no licence, so its author keeps all rights: ask rajuyadav79 before reusing the design.